Hey there I am in the process of purchasing an Obsidian wide body kit to add to my mod list. I am going to do all the work while I am here at wyotech and use there facilitie to do it in also. I am in the stage of purchasing body components so that I have it all before I start my custom class in seven months. I was wondering what wheel specs I could run with and with out wheel spacers to be flush. Also could I do it with 17s ? since it would sit lower or would it look wack ? let me know about your opinions anything will help before i go out and purchase wheels. thanks.

 

17's would look way out of place with such huge fenders. 18's at least but 19'
s would probably be best.

As far as width..I'd say at MINIMUM 10 if not wider..so offset wise you would probably be looking at like +20 and lower..I could be wrong but you definitely would need a pretty aggressive setup to pull that kit off. IMO the obsidian is the only widebody for the tC that I actually somewhat like but you definitely need to have the right setup to pull it off

 

you are going to need at least a 10" to 11.5"

On tina's wide body she is running like 11" on the front and 13" on the rear

and no 17s

 

Wheels like that won't be cheap!

 

easy 4k to make them work, and Tina has 20's

 

custom wheels. atleastt 4k-5k

 

ok so what bout some 9.5 with wheel spacers ?
id like to keep them 18s and try and stay away from 19s and up.
Imma wait till I get some cash together and try and find some from memoryfab or rbmotoring I just need to find the right specs to pull them off.
I would run wheel spacers if it would help.

 

You could run spacers but to get that nice lip that looks good with widebodies a true 11" or higher would be better

 

9.5's will be wayy to small. u need atleast a 2" front and about 4" back spacer to make it look good on a widebody lol

 

The blue tCs wheels had to of cost at least 5-6k

 

those ____s are HRE's i say atleast 7k lol

 

I looked at vivid, depends what they are but most run like 1400-1600 a wheel depending on the size. lol

 

I would love those exact HRE's lol

1600x4= 6400
wheels=600 (could be way off)

about 7k worth of sexiness. but idk if those were custom made for the car or not

 

Im pretty positive they are all custom made, if i won the lottery tomorrow I would defiantly order those as soon as i got the money. lol I think those are part of the 540 series but it is hard to tell.

I am trying to find out the specs on that one dudes wheels that just posted his wide body. The orange one, the size doesnt look too bad

 

That blue one is running 19x10.5 front and 19x11 rear

 

yeah i saw that u asked for his specs, they dont look bad and they dont seem like anything ridiculous either. yeah see 9.5 just wont cut it i think.

too bad that blue car was destroyed, such a sick car/color everything. first official tc with a wire tuck

 

Yea i think that dude is probably running in the 9.5 to 10 with spacers range. They look alittle too sunk in for me, but look alright.

Rado was running 19x10f and 19x12r HREs on his silver tc

 

rado has a silver tc? lmao

yeah man idk they are lil sucked in but i think that guys widebody stick out ALOT more then the onsidian kit.

 

obsidian*

i wont edit cause im a post *****

 

Yea one of like 7 lol, sure you have seen it