[LEDmod]

Scion tC Stock Radio LED Conversion Installation Guide
by LEDmod.com
For all three Generation

** NOTE : This isn't for beginner, so if you aren't sure you can do this then, please seek professional help
I also offer installation for Local and Out of state people

Here is a step by step guide for LED Conversion

Things you'll need (Mostly available at RadioShack)
- Fine point Pencil Soldering Iron (Recommend 15-30 watt)
- Solder : Prefer silver-bearing solder or rosin core solder (Thinner the better, easier to work with)
- Soldering accesories
- Philips screw driver and 10mm socket wrech
- LEDs and Resistor (Available at LEDmod.com)
















*Note : Generation number might not be accurate, but they shares similar installation










You are pretty much done
If you aren't sure if you've installed it right, you can just put the radio back on with just the circuit board attached to check them out.
If all the LED lights up, put everything back together

If you have any questions, just E-mail me at Sean@LEDmod.com