tC: FS: TRD Knob & Cage bushings
#1
Senior Member
SL Member
Thread Starter
iTrader: (5)
Join Date: Aug 2010
Location: Los Angeles, CA
Posts: 351
FS: TRD **** & Cage bushings
1st gen tC only
I have a TRD leather shift **** and the cage bushings that come with the TRD quickshifter. (USED) . U can replace the stock rubber bushings on your stock shifter and slap these bad boys on. Shortens the throw 30%.
The only difference between the TRD shifter Cage and the stock shifter Cage is that the stock cage bushings are made of rubber and are fused onto the stock. Which is why they sell the entire cage. However, u can remove the rubber bushings by following this DIY
http://doctorisotope.com/cage_bushing_guide
I bought a Dr Isotope assembly so I don't need these anymore.
$35 p/u
or
$40 Shipped via USPS
TRD Stock photo and what I am selling
I have a TRD leather shift **** and the cage bushings that come with the TRD quickshifter. (USED) . U can replace the stock rubber bushings on your stock shifter and slap these bad boys on. Shortens the throw 30%.
The only difference between the TRD shifter Cage and the stock shifter Cage is that the stock cage bushings are made of rubber and are fused onto the stock. Which is why they sell the entire cage. However, u can remove the rubber bushings by following this DIY
http://doctorisotope.com/cage_bushing_guide
I bought a Dr Isotope assembly so I don't need these anymore.
$35 p/u
or
$40 Shipped via USPS
TRD Stock photo and what I am selling
Last edited by Alvie; 04-12-2011 at 03:03 AM.
Thread
Thread Starter
Forum
Replies
Last Post