Turbo Toyotas: Vegas Style! Pics and --NEW-- Dyno inside!
02-10-2008, 01:40 AM
#2202
Senior Member
SL Member
Join Date: Jan 2007
Posts: 474
Hey guys can one fo you guys tell me exactly where the three little hoses on the vac block go and also I need to know where the 2 ends on the vac block go/come from. At this point thats the only thing I still need to hook up before I can start my car.
02-10-2008, 12:50 PM
#2203
lol you have same question as brandon before.. there's a pic here somewhere but its hard to dig, but you tap it on one of those lines near the firewall at driver's side... check out meaty's setup
02-11-2008, 07:53 PM
#2207
Senior Member
SL Member
Thread Starter
Join Date: Aug 2004
Location: VEGAS BABY!
Posts: 9,061
Sorry...didn't get on SL this weekend...do you still need the pics of the vac block lines? Are you running with not managmenet at all, or just untuned F/IC?
Oh, and my CEL went away.
Oh, and my CEL went away.
02-13-2008, 08:31 PM
#2215
Senior Member
SL Member
Join Date: Sep 2007
Location: You All Ready Know_..
Posts: 6,187
yeah so now my pressure sensor is being shipped friday! i will be provded with tracking info! i cant wait... haha im also going to putting in suede headliner and all my pilers suede this weekend! what you think?
02-13-2008, 08:35 PM
#2216
Senior Member
SL Member
Thread Starter
Join Date: Aug 2004
Location: VEGAS BABY!
Posts: 9,061
mmmm....I like suede, but what color?
I should be getting my pipes and a bigger spring for more boost within the next few weeks here when Todd comes to town, but I just found out that Ima need new brakes...maybe I can get away with just some new pads
I should be getting my pipes and a bigger spring for more boost within the next few weeks here when Todd comes to town, but I just found out that Ima need new brakes...maybe I can get away with just some new pads
02-18-2008, 04:16 AM
#2217
Senior Member
SL Member
Join Date: Feb 2006
Location: Blue Springs, MO
Posts: 2,184
Originally Posted by Mr_Meaty
mmmm....I like suede, but what color?
I should be getting my pipes and a bigger spring for more boost within the next few weeks here when Todd comes to town, but I just found out that Ima need new brakes...maybe I can get away with just some new pads
I should be getting my pipes and a bigger spring for more boost within the next few weeks here when Todd comes to town, but I just found out that Ima need new brakes...maybe I can get away with just some new pads
Are any of you guys running the scangauge II in your cars??? I am thinking about doing this so when I tune, I will be able to monitor the fuel trims and I can use it to clear codes as well...
02-18-2008, 05:47 AM
#2218
Senior Member
SL Member
Thread Starter
Join Date: Aug 2004
Location: VEGAS BABY!
Posts: 9,061
apparenly, whatever BC you have can only function to double what your WG spring is. So my 3.5psi spring won't boost stead past 7psi. That's why (I think) my 8psi dyno run was so irradic.
my buddy had the scangate II but I only used it to clear my CELs, never tuned with it. are you sure it monitors fuel trims?
my buddy had the scangate II but I only used it to clear my CELs, never tuned with it. are you sure it monitors fuel trims?
02-18-2008, 05:49 AM
#2219
Senior Member
SL Member
Thread Starter
Join Date: Aug 2004
Location: VEGAS BABY!
Posts: 9,061
guys...my parents just moved back into tonw and I've been running around all weekend getting them settled in, so I wasn't on the boards for like 2 days! 
Anyway, there were like 25 threads I posted in that have 2 more pages of responses each, but I'm way to busy to read thorught them all, so if anyone has asked me a question in those trheads, I'm sorry for not responding, and dont' expect me to unless you post up again! 
Anyway, there were like 25 threads I posted in that have 2 more pages of responses each, but I'm way to busy to read thorught them all, so if anyone has asked me a question in those trheads, I'm sorry for not responding, and dont' expect me to unless you post up again!