Turbo Toyotas: Vegas Style! Pics and --NEW-- Dyno inside!
#161
Originally Posted by olaHalo
Originally Posted by amdforever
Looks like a forpinks defender to me.
Helps protect him and his car from the dark, mysterious forces that posses your tC
So would you try to race v8s 4pinks, seriously? Just curious since you seem to have all the 4 bangers knocked out.
Helps protect him and his car from the dark, mysterious forces that posses your tC
So would you try to race v8s 4pinks, seriously? Just curious since you seem to have all the 4 bangers knocked out.
You need the Extra Industrial Strength for me...
#162
Originally Posted by Mr_Meaty
(edited cause olahalo loves me more then he loves rhythmnsmoke!)
That's not fair dude. You are closer to him, so obviously he will love you more.
#164
Senior Member
Scikotics
SL Member
iTrader: (2)
Join Date: Sep 2005
Location: HMFIC Jensen Beach, FL
Posts: 3,314
Originally Posted by krdshrk
Wow those pipes hang real low... so much tubing on that kit.
#166
Originally Posted by etsnet
Originally Posted by krdshrk
Wow those pipes hang real low... so much tubing on that kit.
#168
Matt, I was talking to matt
(olahalo)
Yeah, the pipe i replaced was the hot side, which is not so low, the cold side is still real low.
No problems over speed bumps, but certain dips hit. They used to hit the little plastic thing that was down there.
I think that close up pic makes it look lower then it really is, but it IS a bit lower then the front bumper.
I haven't talked to Todd about gettting a different pipe, but I did mention he should think about re routing them. I'm OK with it.
Brett, can you take some pics of yours?
Oh, and how is your valve cover holding up? Todd took mine off and said it would melt.
(olahalo)
Yeah, the pipe i replaced was the hot side, which is not so low, the cold side is still real low.
No problems over speed bumps, but certain dips hit. They used to hit the little plastic thing that was down there.
I think that close up pic makes it look lower then it really is, but it IS a bit lower then the front bumper.
I haven't talked to Todd about gettting a different pipe, but I did mention he should think about re routing them. I'm OK with it.
Brett, can you take some pics of yours?
Oh, and how is your valve cover holding up? Todd took mine off and said it would melt.
#169
Oh, and they drilled a hole about an inch and a half wide, but it's cause how think all the wires were running from my gauges. Had to put a big hole in my firewall too
But's it's all worth it!
But's it's all worth it!
#170
Originally Posted by Mr_Meaty
Matt, I was talking to matt
(olahalo)
Yeah, the pipe i replaced was the hot side, which is not so low, the cold side is still real low.
No problems over speed bumps, but certain dips hit. They used to hit the little plastic thing that was down there.
I think that close up pic makes it look lower then it really is, but it IS a bit lower then the front bumper.
I haven't talked to Todd about gettting a different pipe, but I did mention he should think about re routing them. I'm OK with it.
Brett, can you take some pics of yours?
Oh, and how is your valve cover holding up? Todd took mine off and said it would melt.
(olahalo)
Yeah, the pipe i replaced was the hot side, which is not so low, the cold side is still real low.
No problems over speed bumps, but certain dips hit. They used to hit the little plastic thing that was down there.
I think that close up pic makes it look lower then it really is, but it IS a bit lower then the front bumper.
I haven't talked to Todd about gettting a different pipe, but I did mention he should think about re routing them. I'm OK with it.
Brett, can you take some pics of yours?
Oh, and how is your valve cover holding up? Todd took mine off and said it would melt.
#171
Originally Posted by Mr_Meaty
Oh, and how is your valve cover holding up? Todd took mine off and said it would melt.
I haven't been following the progress all that closely, but why the concern for it melting?
#172
Originally Posted by rhythmnsmoke
Originally Posted by Mr_Meaty
Oh, and how is your valve cover holding up? Todd took mine off and said it would melt.
I haven't been following the progress all that closely, but why the concern for it melting?
#173
The manifold sits high and is really hot.
If you look at that one pic, you can see the plastic wire loom melting, but it's much thinner plastic.
I'm going to put mine back on and see how it does.
It may be that heat plus the natually heat in Vegas.
If you look at that one pic, you can see the plastic wire loom melting, but it's much thinner plastic.
I'm going to put mine back on and see how it does.
It may be that heat plus the natually heat in Vegas.
#174
Originally Posted by rhythmnsmoke
Originally Posted by olaHalo
Originally Posted by amdforever
Looks like a forpinks defender to me.
Helps protect him and his car from the dark, mysterious forces that posses your tC
So would you try to race v8s 4pinks, seriously? Just curious since you seem to have all the 4 bangers knocked out.
Helps protect him and his car from the dark, mysterious forces that posses your tC
So would you try to race v8s 4pinks, seriously? Just curious since you seem to have all the 4 bangers knocked out.
You need the Extra Industrial Strength for me...
#175
Originally Posted by olaHalo
well nothing can stop you. youve been through more poop than any of us
Good observation....I probably would get an award for being in some of the most heated battles on here.
No pain, No gain I guess....
#176
Originally Posted by rhythmnsmoke
Originally Posted by olaHalo
well nothing can stop you. youve been through more poop than any of us
Good observation....I probably would get an award for being in some of the most heated battles on here.
No pain, No gain I guess....
#178
Originally Posted by brett561tc
Originally Posted by rhythmnsmoke
Originally Posted by olaHalo
well nothing can stop you. youve been through more poop than any of us
Good observation....I probably would get an award for being in some of the most heated battles on here.
No pain, No gain I guess....
I've never done that by the way. I have asked for a thread clean up before. But people get warned/banned on their own merit. Shoot, I got 2 warnings myself....
But no, I have not personally cried to a mod and say can you ban him. I can say this though, some people have been banned for arguing with me....LOL.
#180
Originally Posted by brett561tc
did i say that you did anything like that at all??? or is that just a guilty conscious speaking?
No, I didn't say you were saying that, just a simple statement. Can't have a guilty conscious about something you have never done...