Notices
PPC: Engine / Drivetrain
turbos, exhaust, intakes

xA: Built 1NZFE w/ turbo, Defi gauges, ect

Thread Tools
 
Search this Thread
 
Old 06-23-2012, 10:42 PM
  #1  
Senior Member
5 Year Member
SL Member
Thread Starter
 
bugandxbandme's Avatar
 
Join Date: Oct 2008
Location: Richmond, Virginia
Posts: 160
Default Built 1NZFE w/ turbo, Defi gauges, ect

My beloved turbo Scion xA RS 2.0 was totaled. I bought it back from the insurance company so someone could benefit from its death. The whole front of the car was undamaged, so everything relating to the engine is fine. This was a very reliable engine that was built to run on 12.5 psi. I had no issues with it in the two years I drove it. I put less than 10,000 miles on it. The rebuilt motor has 22,000 miles on it total.
This car is in Richmond, Virginia.
Link to pics:http://photobucket.com/xapartout


This is the engine info FROM THE AD I bought the car from 2 years ago. It has been very reliable. It doesn't even throw any codes.
-1NZFE Rebuilt at 29000 miles for proper performance.
-Custom Crower Forged Connectiong Rods.
-CP Pistons Forged 8.5:1 Pistons and Wrist Pins.
-CP Pistons Chrome moly piston rings.
-Toga High Performance Main and Rod Bearings.
-Engine block was machined for rods, honed, and decked.
-All fasteners, gaskets, seals, o-rings and other misc. components were replaced with brand new OEM Toyota parts.
-Scion xB Greddy Turbo kit that was completely customized for use in this car.
-Turbo has been rebuilt with OEM Mitsubishi components
-Completely custom intercooler piping by FujiiSPL
-Greddy Type-S BOV (very hard to find)
-Greddy Front Mount Intercooler
-Mishimoto Performance Radiator
-Perrin High Flow Fuel Rail
-Perrin Silicone Radiator Hoses
-OEM Scion tC 2AZFE 370cc Injectors
-FujiiSPL Oil Feed line
-Factory Air Conditioning deleted
-Energy Suspenstion Motor Mounts
-Ingalls Engineering Engine Torque Dampener
-Custom 2.5" exhaust, High flow cat, no resonator, adapted to TRD axleback muffer. Great sounding exhaust!
-Centerforce Dual Friction clutch package
-Fidanza Aluminum lightweight flywheel
-Thermal protection products from DEI
Compression Tested after 500 miles; 182, 182, 185, 182 (1 to 4)
you can have the whole engine, transmission, turbo and engine management for $2000. You will have to remove it yourself OR you can take the car after the parts everyone wants are removed. All parts related to the motor will be left except the gauges and exhaust.
If you want the gauges and exhaust the whole thing will be $2300.

Also the whole car will be parted out, so make offers on other things you need.

Link to pics and (badly done) video of engine running.
http://photobucket.com/xapartout

Stainless doorsills, Milezauto spoiler and grill are SOLD
Front orange turn signals-$35 shipped (in great condition)
Factory fogs with bracket, screws, and switch, but no relay-$50 shipped
The RS 2.0 interior is also available. (blue seat inserts)

Thanks,

Heather

Last edited by bugandxbandme; 07-02-2012 at 08:00 PM. Reason: Updates
bugandxbandme is offline  
Old 06-24-2012, 04:38 AM
  #2  
Senior Member
10 Year Member
5 Year Member
SL Member
iTrader: (10)
 
ColonelSanders85's Avatar
 
Join Date: Jun 2009
Location: Clearwater, Florida
Posts: 739
Default

Wow nice, how much horsepower and torque were you putting down with that setup?
ColonelSanders85 is offline  
Old 06-24-2012, 05:54 AM
  #3  
Senior Member
5 Year Member
SL Member
 
eignub's Avatar
 
Join Date: Jun 2010
Location: Tucson, AZ
Posts: 403
Default

dang, wish i had the money right now. glws.
eignub is offline  
Old 06-24-2012, 11:25 PM
  #4  
Senior Member
5 Year Member
SL Member
Thread Starter
 
bugandxbandme's Avatar
 
Join Date: Oct 2008
Location: Richmond, Virginia
Posts: 160
Default

It was dynoed at 157hp at 8 pounds of boost BEFORE the engine was rebuilt with forged internals to run 12psi. It was not dynoed after. I wanted to have it dynoed but here in Richmond there aren't many shops that do that.
It had awesome pull on the interstate, passing people was a breeze

I'm sad that it was taken out by a stupid red light runner.
bugandxbandme is offline  
Old 06-28-2012, 09:49 PM
  #5  
Senior Member
5 Year Member
SL Member
Thread Starter
 
bugandxbandme's Avatar
 
Join Date: Oct 2008
Location: Richmond, Virginia
Posts: 160
Default

Spoiler and gauge pod pillar are sold
bugandxbandme is offline  
Old 07-02-2012, 07:55 PM
  #6  
Senior Member
5 Year Member
SL Member
Thread Starter
 
bugandxbandme's Avatar
 
Join Date: Oct 2008
Location: Richmond, Virginia
Posts: 160
Default

Gauges are not sold yet, though. Someone make me an offer on the whole setup. I do not want to sell the motor and turbo separately, but I will if no one wants it all together.
bugandxbandme is offline  
Old 07-03-2012, 12:31 AM
  #7  
Member
5 Year Member
SL Member
 
xA_flyby's Avatar
 
Join Date: Nov 2011
Location: Southern Maryland
Posts: 86
Default

i can make an offer now...think u can holdout till friday? lol
xA_flyby is offline  
Old 07-03-2012, 08:20 PM
  #8  
Senior Member
5 Year Member
SL Member
Thread Starter
 
bugandxbandme's Avatar
 
Join Date: Oct 2008
Location: Richmond, Virginia
Posts: 160
Default

Haha, yeah
Come check it out!
bugandxbandme is offline  
Old 07-07-2012, 07:10 PM
  #9  
Senior Member
5 Year Member
SL Member
Thread Starter
 
bugandxbandme's Avatar
 
Join Date: Oct 2008
Location: Richmond, Virginia
Posts: 160
Default

Deposit taken on engine, turbo, ecu, gauges. Many other parts still available so i will start a different updated part out thread later.
bugandxbandme is offline  
Old 07-08-2012, 06:24 PM
  #10  
Senior Member
10 Year Member
5 Year Member
Scikotics
SL Member
 
SatsumaxA's Avatar
 
Join Date: Oct 2004
Location: Satsuma, Louisiana
Posts: 343
Default

Headlights and eyelids ? Are they available & how much $$?
SatsumaxA is offline  
Old 07-09-2012, 08:01 PM
  #11  
Senior Member
5 Year Member
SL Member
Thread Starter
 
bugandxbandme's Avatar
 
Join Date: Oct 2008
Location: Richmond, Virginia
Posts: 160
Default

Well, the eyelids have sold already. The headlights are available and they have working 6k HID. However they NEED to be refinished. The previous owner painted eyelids on them with some sort of back paint that has to be scraped or sanded off. If you still want them they are $100 shipped (with HID).
bugandxbandme is offline  
Old 07-30-2012, 04:46 AM
  #12  
Senior Member
5 Year Member
SL Member
Thread Starter
 
bugandxbandme's Avatar
 
Join Date: Oct 2008
Location: Richmond, Virginia
Posts: 160
Default

SOLD please lock!
bugandxbandme is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
brett561tc
PPC: Engine / Drivetrain
13
09-15-2015 06:33 AM
Joe_Dezod
Scion tC 1G Forced Induction
152
05-23-2013 08:59 PM
Joe_Dezod
Scion tC 1G Forced Induction
45
08-24-2008 12:39 AM
ON3GO
Scion xB 1st-Gen Owners Lounge
10
02-13-2005 06:40 AM
XBOXED
Scion tC 1G Owners Lounge
8
06-23-2004 02:12 PM



Quick Reply: xA: Built 1NZFE w/ turbo, Defi gauges, ect



All times are GMT. The time now is 10:47 AM.