F/S: CP Forged Pistons tC(2.4L)
04-17-2010 | 03:14 AM
#1
Thread Starter
Joined: Nov 2005
Posts: 1,548
From: Nashville, TN
F/S: CP Forged Pistons tC(2.4L)
CP Forged Pistons for sale, Stock bore(88.5mm), Compression Ratio (9.0) . These have approx 1500 miles on them, and would have went back in my motor but my cylinder walls were too scored to go with stock bore pistons. I had to go .020 to clean up my cylinder walls...this is the ONLY reason I am selling these. Paid I believe $500 new selling for $200 (Comes with wrist pins and clips)
Last edited by j3st3r; 05-03-2010 at 03:15 PM.
04-20-2010 | 02:29 AM
#10
Thread Starter
Joined: Nov 2005
Posts: 1,548
From: Nashville, TN
04-20-2010 | 03:29 AM
#11
Senior Member
SL Member
Joined: Aug 2006
Posts: 4,888
From: Miami
Re: F/S: CP Forged Pistons tC(2.4L)
Originally Posted by j3st3r
cylinder walls were scored because of the.....~easy take a deep breath~....person who built the motor originally....while I have plenty of adjectives for him...I will leave it at that
04-20-2010 | 03:33 AM
#12
Thread Starter
Joined: Nov 2005
Posts: 1,548
From: Nashville, TN
Compression was actually not too bad...but the head was done all wrong so the valves were not even actually sealing at operating temp. Was just a bad situation all the way around, fortunately this time it was done right. Remember too I did not put very many miles on the motor before discovering all this crap. When I got the car back initially from...well that guy...fuel pressure was set at 70psi...at idle...and it had 1200cc injectors in it....
04-23-2010 | 01:19 AM
#16
Thread Starter
Joined: Nov 2005
Posts: 1,548
From: Nashville, TN
Geez....now you guys are making think I should raise the price.....J/K....I am all about helping out, would rather someone get use out them, then have them just laying around
bump for you!
