Jessicas 527whp dezod custom kit for sale!! Hurry!!!! Includes 67mm tbb comp turbo!!
10-27-2009, 07:02 AM
#1
Senior Member
SL Member
Thread Starter
Join Date: May 2008
Posts: 199
Jessicas 527whp dezod custom kit for sale!! Hurry!!!! Includes 67mm tbb comp turbo!!
We are selling our dezod turbo kit for a scion tc 5 speed. The manifold is jethot coated sterling, the downpipe is coated sterling, and the turbine housing of the turbo
This kit also has extra bracing tig welded to the bottom and top as the manifolds when under high HP(engine movement) can crack (so this is taken care of)
You will get the complete kit, with an upgraded Engine management,(emanage ultimate with PNP HARNESS!!) ALSO THE UPGRADED SPECIAL COMP TRIPLE BALL BEARING TURBO THAT MADE 527WHP ON LESS THAN 25 PSI!!!
It spools very quick! You will also have room to build later, since the turbo is good for around 700 HP, If you ever decide to build the motor.
ANOTHER VERY IMPORTANT NOTE: The scion tc has very limited space for a dumptube with this system(so you can run open wastegate dump) we will also include that dump tube for the price listed this was a very time consuming fabrication to the car. IT goes all the way down to the bottom past the back of the oil pan! underneath the car!
The wastegate has a 13 psi spring(I will throw in the 8.7 psi spring as well!
This includes 700CC plug and play injectors!!!
The turbo kit has around 3500 miles!! it is like new! very much, the turbo has less than 100 miles!. you can see pics of it here
THIS KIT COST INCLUDING EMANAGE AND PNP HARNESS(ADD $500 FROM DEZOD) WITH JETHOT COATING ON THE LISTED PARTS(TURBO, DOWNPIPE,MANIFOLD) ($350 FROM DEZOD) AROUND $5200-$5300 WITH THE TBB 67MM TURBO, WITHOUT THE DUMP TUBE! THE DUMP TUBE SETUP WOULD COST A BIT TO FAB IT UP AS WELL AS WE HAVE DONE, IT IS SUPER NICE AND TOOK HOURS TO MAKE IN THIS CLEARANCE.
EVERYTHING INCLUDING THE UPGRADED EMANAGE ULTIMATE AND PNP HARNESS, JET HOT COATING ALREADY DONE AS WELL! KIT IS LIKE NEW!
$3100!!!!!!
IT IS VERY MUCH LIKE NEW!! WE ARE SELLING IT BECASUE WE HAVE MADE CLOSE TO 550WHP WITH THIS KIT ON 23 PSI, AND ARE INSTALLING A CUSTOM SETUP THAT WILL PRODUCE EFFICIENCY FOR OUR GOAL.
I WILL ALSO INCLUDE AND AGENCY POWER TITANIUM CANISTER FULL S PIPE BACK EXHUAST FOR ONLY $300!!
JUST PM ME, I DONT THINK THIS WILL LAST LONG, THIS SETUP IS PROVEN!! AND WORKS BEYOND FLAWLESSLY TRIED AND TRUE. WE CAN ARRANGE A PICK UP IF YOU WANT TO SAVE ON SHIPPING. I LIVE IN WV.
This kit also has extra bracing tig welded to the bottom and top as the manifolds when under high HP(engine movement) can crack (so this is taken care of)
You will get the complete kit, with an upgraded Engine management,(emanage ultimate with PNP HARNESS!!) ALSO THE UPGRADED SPECIAL COMP TRIPLE BALL BEARING TURBO THAT MADE 527WHP ON LESS THAN 25 PSI!!!
It spools very quick! You will also have room to build later, since the turbo is good for around 700 HP, If you ever decide to build the motor.
ANOTHER VERY IMPORTANT NOTE: The scion tc has very limited space for a dumptube with this system(so you can run open wastegate dump) we will also include that dump tube for the price listed this was a very time consuming fabrication to the car. IT goes all the way down to the bottom past the back of the oil pan! underneath the car!
The wastegate has a 13 psi spring(I will throw in the 8.7 psi spring as well!
This includes 700CC plug and play injectors!!!
The turbo kit has around 3500 miles!! it is like new! very much, the turbo has less than 100 miles!. you can see pics of it here
THIS KIT COST INCLUDING EMANAGE AND PNP HARNESS(ADD $500 FROM DEZOD) WITH JETHOT COATING ON THE LISTED PARTS(TURBO, DOWNPIPE,MANIFOLD) ($350 FROM DEZOD) AROUND $5200-$5300 WITH THE TBB 67MM TURBO, WITHOUT THE DUMP TUBE! THE DUMP TUBE SETUP WOULD COST A BIT TO FAB IT UP AS WELL AS WE HAVE DONE, IT IS SUPER NICE AND TOOK HOURS TO MAKE IN THIS CLEARANCE.
EVERYTHING INCLUDING THE UPGRADED EMANAGE ULTIMATE AND PNP HARNESS, JET HOT COATING ALREADY DONE AS WELL! KIT IS LIKE NEW!
$3100!!!!!!
IT IS VERY MUCH LIKE NEW!! WE ARE SELLING IT BECASUE WE HAVE MADE CLOSE TO 550WHP WITH THIS KIT ON 23 PSI, AND ARE INSTALLING A CUSTOM SETUP THAT WILL PRODUCE EFFICIENCY FOR OUR GOAL.
I WILL ALSO INCLUDE AND AGENCY POWER TITANIUM CANISTER FULL S PIPE BACK EXHUAST FOR ONLY $300!!
JUST PM ME, I DONT THINK THIS WILL LAST LONG, THIS SETUP IS PROVEN!! AND WORKS BEYOND FLAWLESSLY TRIED AND TRUE. WE CAN ARRANGE A PICK UP IF YOU WANT TO SAVE ON SHIPPING. I LIVE IN WV.
10-27-2009, 01:34 PM
#4
Senior Member
SL Member
Join Date: Jul 2007
Location: Arvada, CO
Posts: 7,024
i know id have a hard tiime getting that for my kit and its really one of a kind but i wish you luck and i think this is a good value 3100 for a proven power maker if someone dosent get this they suck and should be banned
11-20-2010, 04:46 PM
#16
Senior Member
SL Member
Join Date: Jun 2005
Location: South River, NJ
Posts: 1,193
If you are parting out then I am interested in purchasing the downpipe, and possibly the manifold. How much is that shipped to 08882? Also how long will it take to get here and are there faster shipping options available?
Thanks,
JOE
Thanks,
JOE
11-20-2010, 05:42 PM
#17
Senior Member
SL Member
Join Date: Jul 2009
Posts: 125
I just had a kit made just spent 4k on that I would have got this if it was a month ago. But. The tune that's on ur emange ult. I will pay u if u could email me the tune. Off of it. I have the same set up pretty much and should make around the same power at 25psi. That would be great. And I'll try to talk my buddy into buying it. And nice car and good job on it btw. With 600+ power and 19in hre,s. And beating z06s on utube. Really nasty car good job man gl with sale
fml