Exposed 7.0 Signal Mirror change sale
03-20-2010, 02:51 AM
#1
Senior Member
SL Member
Thread Starter
iTrader: (2)
Join Date: Jul 2007
Location: Fayetteville, NC
Posts: 444
Exposed 7.0 Signal Mirror change sale
As some from last year know I did a exposed signal mirror change last year at exposed for a discounted price. Well this year I have decided to do it again. For Scion Exposed 7.0 I will do the color change for only $35.00 for any model Scion, However I have a limited LED supply so only the first few on my list will have these. I can do these in White, Blue, Green, Pink, and Red. I will be arriving at the La Quinta Inn at 1024 Crevasse St., Lakeland, FL 33809 on Apr 2 for those that want them before the show. you can Pm me for my contact info. Below are some videos of some of the ones I have done. Thanks for looking
Josh
TC:
Blue:
http://www.youtube.com/watch?v=jzVBBfzM_Nw
Pink:
http://www.youtube.com/watch?v=Eo6IFNy3-kE
White:
http://www.youtube.com/watch?v=usIwSqQ72PE
XB2/XD:
Light Green:
http://www.youtube.com/watch?v=WWeu2KcA6Mo
White:
http://www.youtube.com/watch?v=PBZfUEmj7lQ
If you have any question feel free to ask.
Josh
TC:
Blue:
http://www.youtube.com/watch?v=jzVBBfzM_Nw
Pink:
http://www.youtube.com/watch?v=Eo6IFNy3-kE
White:
http://www.youtube.com/watch?v=usIwSqQ72PE
XB2/XD:
Light Green:
http://www.youtube.com/watch?v=WWeu2KcA6Mo
White:
http://www.youtube.com/watch?v=PBZfUEmj7lQ
If you have any question feel free to ask.
03-21-2010, 07:02 AM
#10
Senior Member
SL Member
Thread Starter
iTrader: (2)
Join Date: Jul 2007
Location: Fayetteville, NC
Posts: 444
KAYI078: To install these all you need to do are the following steps.
1. Remove outer mirror cover. This is held on by 7 tabs. you need to move the mirror all the way in to get to the outside tabs. once you get 2-3 tabs started you can pull on the cover with a little force.
2. remove the plug that is connected to the lamp assy. if you need a little help use a flat tip screw driver, be careful not to break the plastic around the plug.
3. remove the 2 screws holding the lamp assy to the mirror, then remove the assy.
That is it.
All PM's replied and thanks diego.
1. Remove outer mirror cover. This is held on by 7 tabs. you need to move the mirror all the way in to get to the outside tabs. once you get 2-3 tabs started you can pull on the cover with a little force.
2. remove the plug that is connected to the lamp assy. if you need a little help use a flat tip screw driver, be careful not to break the plastic around the plug.
3. remove the 2 screws holding the lamp assy to the mirror, then remove the assy.
That is it.
All PM's replied and thanks diego.
