06 tC part out! Carbon Fibre, TRD Supercharger, Wheels, Exhaust, Header HID Retrofit!
#1
06 tC part out! Carbon Fibre, TRD Supercharger, Wheels, Exhaust, Header HID Retrofit!
So the time has come for me to part out my car and just drive it for awhile. I'm getting out of the "modding" game and I have some stuff to get rid of!
05-06 TRD Supercharger Parts
1) Compressor Housing (line going into oil sprayer is broken, but I'm fairly certain it can be replaced.) $300
2) Compressor Housing transmission mounting Bracket- $50
3) 3 Bosch BPV's 1 is the nicer one that lots of people use, the other 2 are the ones that come with the TRD kit. Better one $40 , other 2 $25 a piece
4) Intake tubing from the S/C to the airbox, I will part it out seperately, make offers
5) TRD 440cc injectors, I have 2 sets, $150 each
6) Belt for 7lb pulley $25
7) Belt for NST 65mm pulley- SOLD
8 ) NST 65 mm pulley (inside part is damaged, but pulley is still functional)- SOLD
9) Impeller shaft $100 obo
10) Any other misc parts from the kit you may need pm me.
*If you want the whole kit as is I'd let it all go for $700. You would need to get the bracket that holds the bearings on the pulley side welded and the outer race from an old bearing pulled out of the bracket before you could use it.
Wheels
XXR 006's black w/ polished lip. 17x7 42 offset. 2 wheels have come curb rash (up close pics available) No tires included. $400
Exhaust- SOLD!
Header- SOLD!
Headlights
OEM Headlights with TSX projectors and BMW shrouds. Will come with Matsu____a Gen 3 ballasts and a wiring harness. $400 buy them outright or $250 + you send me your stock headlights and I send you these after I get your stockies. (tons of ppl on here can vouch for me) SOLD
VIS OEM style CF Hood: $400 (a friend's hood but it's on my car and I'll try to sell it for her.)
Racing Solution Big Style CF lip spoiler: $150
JDM Carboy CF OEM mirror covers: $150
VRD Yellow Fog Lights (white bulbs included): SOLD
Full LED Third Brake Light: SOLD
Pics:
*Upclose pics of anything available upon request* Just pm me or email me goff (dot) john (at) gmail.com
*Prices do not include shipping!*
05-06 TRD Supercharger Parts
1) Compressor Housing (line going into oil sprayer is broken, but I'm fairly certain it can be replaced.) $300
2) Compressor Housing transmission mounting Bracket- $50
3) 3 Bosch BPV's 1 is the nicer one that lots of people use, the other 2 are the ones that come with the TRD kit. Better one $40 , other 2 $25 a piece
4) Intake tubing from the S/C to the airbox, I will part it out seperately, make offers
5) TRD 440cc injectors, I have 2 sets, $150 each
6) Belt for 7lb pulley $25
7) Belt for NST 65mm pulley- SOLD
8 ) NST 65 mm pulley (inside part is damaged, but pulley is still functional)- SOLD
9) Impeller shaft $100 obo
10) Any other misc parts from the kit you may need pm me.
*If you want the whole kit as is I'd let it all go for $700. You would need to get the bracket that holds the bearings on the pulley side welded and the outer race from an old bearing pulled out of the bracket before you could use it.
Wheels
XXR 006's black w/ polished lip. 17x7 42 offset. 2 wheels have come curb rash (up close pics available) No tires included. $400
Exhaust- SOLD!
Header- SOLD!
Headlights
OEM Headlights with TSX projectors and BMW shrouds. Will come with Matsu____a Gen 3 ballasts and a wiring harness. $400 buy them outright or $250 + you send me your stock headlights and I send you these after I get your stockies. (tons of ppl on here can vouch for me) SOLD
VIS OEM style CF Hood: $400 (a friend's hood but it's on my car and I'll try to sell it for her.)
Racing Solution Big Style CF lip spoiler: $150
JDM Carboy CF OEM mirror covers: $150
VRD Yellow Fog Lights (white bulbs included): SOLD
Full LED Third Brake Light: SOLD
Pics:
*Upclose pics of anything available upon request* Just pm me or email me goff (dot) john (at) gmail.com
*Prices do not include shipping!*
Last edited by JBGsTC; 08-14-2009 at 03:49 PM.
#5
Where are you located?
All that is required to put it on your car would be included except: The fuel line that comes in the kit and bearings for the pulley side bracket (you can get them for $8 from fastenal).
The line to the compressor housing is damaged and the bracket that holds the s/c to the engine on the pulley side is broken and needs welded. The old bearing spun in the bracket and one of the outer races of the bearing is stuck in the bracket and needs to be pulled out.
The line to the compressor housing is damaged and the bracket that holds the s/c to the engine on the pulley side is broken and needs welded. The old bearing spun in the bracket and one of the outer races of the bearing is stuck in the bracket and needs to be pulled out.
#10
I've got both, let me dig em up on my computer and I'll post them.
They are covers that go over the OEM mirrors with double sided tape
Only if I don't get any interest in the whole thing. I'll let you know because I've already had a few pm's about it.
Only if I don't get any interest in the whole thing. I'll let you know because I've already had a few pm's about it.
#15
PM Replied. I'll get pics today of it.
I do take paypal. And you'd be fine on the TRD's I'm on s-techs and have never rubbed. The curb marks aren't bad, I'll get you pics of those in a few minutes also.
Yes
$55
Yes
$55
#16
Pictures:
Keep in mind everything is really dirty, until this week the car had been sitting for about 3 months, haha...
Exhaust:
Hood:
Mirrors: (Both are in perfect shape and look the same)
Curb Rash on 1 Wheel:
Curb Rash on other wheel:
Keep in mind everything is really dirty, until this week the car had been sitting for about 3 months, haha...
Exhaust:
Hood:
Mirrors: (Both are in perfect shape and look the same)
Curb Rash on 1 Wheel:
Curb Rash on other wheel:
#18
Up Close of headlights and cutoffs....
Pffhx4zd.jpg?t=1248961813
DSCN0529Small.jpg?t=1248961858
Header up close (those spots are raindrops, nothing more.)
all pm's replied.
Pffhx4zd.jpg?t=1248961813
DSCN0529Small.jpg?t=1248961858
Header up close (those spots are raindrops, nothing more.)
all pm's replied.