FS: Tein Basic Coilovers
#1
Thread Starter
Joined: Sep 2009
Posts: 2,092
From: Torrance, California
FS: Tein Basic Coilovers
i have a set of Tein Basic Coilovers. ive had these at my friend's dad's shop for a few months just sitting around cuz the rings were siezed like crazy. nothing could get them out, so i decided to cut them off. everything is all fixed now. they are in great working condition, none are blown. i bought them from swsnowman a while ago(who ripped me off btw but w.e., im over it), and from what he told me, they had about 35k miles. when i had them i ran them for literally less than a thousand miles cuz i was annoyed that i wasnt able to adjust them.
well now, they're finally fixed. so, ill be selling them for $550. i'd prefer local since shipping for these would be a pain. but ill leave that option for the last resort. let me know whats up!!!
well now, they're finally fixed. so, ill be selling them for $550. i'd prefer local since shipping for these would be a pain. but ill leave that option for the last resort. let me know whats up!!!
#3
Thread Starter
Joined: Sep 2009
Posts: 2,092
From: Torrance, California
you can see the very top coilover has no perch rings on it. the coilover below it has one ring. and the other two coilovers has both rings still on them. they are NOT siezed anymore. you can even spin them by hand. i cleaned em up a bit from all the dirt and calcium buildups it had on them.
and these are the rings i cut.
i only cut three, so you would only have to replace those. i called tein USA, and they said its $12 for each ring. its somewhat close to my house, so if someone buys these coilovers, i'll gladly buy the rings and ship em out with the coilovers. or you can buy them yourself.
and these are the rings i cut.
i only cut three, so you would only have to replace those. i called tein USA, and they said its $12 for each ring. its somewhat close to my house, so if someone buys these coilovers, i'll gladly buy the rings and ship em out with the coilovers. or you can buy them yourself.
#11
Thread Starter
Joined: Sep 2009
Posts: 2,092
From: Torrance, California
U know what, I still have them. My friend said he was gonna buy them but he hasn't got back to me. He said if I did another buyer to go ahead and sell it cuz it might take him a while to get the money. Are you interested?
#14
Thread Starter
Joined: Sep 2009
Posts: 2,092
From: Torrance, California
I'd prefer local since shipping will be crazy. But if I need to ship, all I wantfor these is $610. So shipping cost is on you. Reason why I said 610 instead of 550 like I said before is cuz I bought the 3 extra perch rings and spanner wrenches from tein. That coated me $60 alone. So I'll basically only be getting 550. So basically $610 plus shipping
#16
Thread Starter
Joined: Sep 2009
Posts: 2,092
From: Torrance, California
Yea. As I said above, the $60 went to buying three new rings and new spanner wrenches. Since I cut 3 rings, I bought those new rings. And uhhhh, 200 halfway, how bout you drive the 3/4 of it. Even still, that's a lot of driving on both our ends. Haha. But, depending on if what other offers I get, I'll consider it.
#19
Thread Starter
Joined: Sep 2009
Posts: 2,092
From: Torrance, California
these are the 3 new rings and the spanner wrences(theres two in that package)
this is the two fronts with the older rings
and this is the two rears. with 1 old ring and 3 brand new rings
this is the two fronts with the older rings
and this is the two rears. with 1 old ring and 3 brand new rings