Looking for 550cc injectors - Daeteschwerk PNP

 

step it up to 700s dont make the same mistake i did and buy 550s

 

You dont need no 700 unless your lookiing to make big hp i ran 550cc injectors and i made 372hp just fine. if your looking for bigger then go for it but if not its a waste. and your best bet is ebay lol i picked mine up brand new with warranty for i want to say 350 or so

 

700 is good for about 420. 550s are good for 350

what are you wasting by using a 700 injector over a 550? please explain

 

Use this if your not sure http://www.rceng.com/technical.aspx

 

trd07tc Quote:
Originally Posted by jar2709
You dont need no 700 unless your lookiing to make big hp i ran 550cc injectors and i made 372hp just fine. if your looking for bigger then go for it but if not its a waste. and your best bet is ebay lol i picked mine up brand new with warranty for i want to say 350 or so

700 is good for about 420. 550s are good for 350

what are you wasting by using a 700 injector over a 550? please explain





Good observation on the injector size. Your calculations were dam near dead on! All Im saying is depends on what your looking to do will depend on what size you need. If your looking to make big power down the road i agree go with the 700cc if not then go with a smaller cc injector.

 

sent u a pm

 

i have a set of 650 rc with clips

 

i have 550cc with clips make an offer

 

i got 550's pnp

 

i have rc550s 200$

 

I have Deateschwerk 550cc injectors, looking to trade for something a little bigger like 630cc or 700cc if you have.