So who is working on anything new.........
#2623
Just got my HIDXtra 9006 6000k HID kit in the mail, installed as well. Yay!
edit: on the drive to class they are way whiter than I remember my operatic/3bspec kit being. weird.
edit: on the drive to class they are way whiter than I remember my operatic/3bspec kit being. weird.
Last edited by optional; 01-08-2010 at 02:27 AM.
#2625
I have heard they are good at taking care of ya. I mean they come with a 2 yr warranty. I just bought some new HID's from them. My umnitza ones seem to be acting up a lil and i needed new bulbs. The hid kit was cheaper than 2 new bulbs so i will see how they work compared to the umnitza.
#2626
I've heard good things too, but I've PM'd, replied to their thread, and emailed them so far, probably just off for the weekend, oh well, already tore out both sides and put my stock bulbs back in so I don't look like a retard with either one non-working HID, or two different color headlights, so yeah, hopefully they take care of me, and it sounds like they will from other reports.
#2627
Senior Member
Balliztik
SL Member
Thread Starter
Join Date: Jun 2007
Location: Washington
Posts: 9,538
Well I decided to mod Egplant........parts are a lot cheaper for it than the tC......
Got Injen intake back in,stubby antenna back on,Sparco shift **** and ebrake ordered,Sparco brake boot installed,OBX pedal covers back on.
This is the list of what will get done on the car.....gonna take a while to do.Some of the parts I have laying around some gonna have to buy as I get tile repair money.
205/40/17 Tires
Tint
Sparco r100 seats,slider and brackets
Rear seat delete
Amps and subs go in place of back seat.
Comps in the doors
Edead the car
Harness bar
Takatas
Cross bar brace in the back
23mm rear sway
Front strut bar
Optima battery
Greddy catch can
Samco hose
CF engine cover
billet over flow tank
Dry CF interior
Green underglows and green interior lighting
C1 rear spoiler
BBK front rotors and caliper offsets,ther is no calipers for Yaris and the xB BBK does not fit
Rear brake disk conversion
Kaminari CF hood
Still not sure if I want a body kit or not,car sits low as it is,but there are two nice kits out for Yaris from Taiwan,JDM kits that are being shipped to supplier in USA,they are not expensive honestly but gettign it all painted would be,so may just go SEibon CF kit to save on painting....
I figure it will take 24 months to scrape together all the parts....but I should be able to at least goto shows and represent by summer.....
That is all.....
Got Injen intake back in,stubby antenna back on,Sparco shift **** and ebrake ordered,Sparco brake boot installed,OBX pedal covers back on.
This is the list of what will get done on the car.....gonna take a while to do.Some of the parts I have laying around some gonna have to buy as I get tile repair money.
205/40/17 Tires
Tint
Sparco r100 seats,slider and brackets
Rear seat delete
Amps and subs go in place of back seat.
Comps in the doors
Edead the car
Harness bar
Takatas
Cross bar brace in the back
23mm rear sway
Front strut bar
Optima battery
Greddy catch can
Samco hose
CF engine cover
billet over flow tank
Dry CF interior
Green underglows and green interior lighting
C1 rear spoiler
BBK front rotors and caliper offsets,ther is no calipers for Yaris and the xB BBK does not fit
Rear brake disk conversion
Kaminari CF hood
Still not sure if I want a body kit or not,car sits low as it is,but there are two nice kits out for Yaris from Taiwan,JDM kits that are being shipped to supplier in USA,they are not expensive honestly but gettign it all painted would be,so may just go SEibon CF kit to save on painting....
I figure it will take 24 months to scrape together all the parts....but I should be able to at least goto shows and represent by summer.....
That is all.....
#2629
Well I decided to mod Egplant........parts are a lot cheaper for it than the tC......
Got Injen intake back in,stubby antenna back on,Sparco shift **** and ebrake ordered,Sparco brake boot installed,OBX pedal covers back on.
This is the list of what will get done on the car.....gonna take a while to do.Some of the parts I have laying around some gonna have to buy as I get tile repair money.
205/40/17 Tires
Tint
Sparco r100 seats,slider and brackets
Rear seat delete
Amps and subs go in place of back seat.
Comps in the doors
Edead the car
Harness bar
Takatas
Cross bar brace in the back
23mm rear sway
Front strut bar
Optima battery
Greddy catch can
Samco hose
CF engine cover
billet over flow tank
Dry CF interior
Green underglows and green interior lighting
C1 rear spoiler
BBK front rotors and caliper offsets,ther is no calipers for Yaris and the xB BBK does not fit
Rear brake disk conversion
Kaminari CF hood
Still not sure if I want a body kit or not,car sits low as it is,but there are two nice kits out for Yaris from Taiwan,JDM kits that are being shipped to supplier in USA,they are not expensive honestly but gettign it all painted would be,so may just go SEibon CF kit to save on painting....
I figure it will take 24 months to scrape together all the parts....but I should be able to at least goto shows and represent by summer.....
That is all.....
Got Injen intake back in,stubby antenna back on,Sparco shift **** and ebrake ordered,Sparco brake boot installed,OBX pedal covers back on.
This is the list of what will get done on the car.....gonna take a while to do.Some of the parts I have laying around some gonna have to buy as I get tile repair money.
205/40/17 Tires
Tint
Sparco r100 seats,slider and brackets
Rear seat delete
Amps and subs go in place of back seat.
Comps in the doors
Edead the car
Harness bar
Takatas
Cross bar brace in the back
23mm rear sway
Front strut bar
Optima battery
Greddy catch can
Samco hose
CF engine cover
billet over flow tank
Dry CF interior
Green underglows and green interior lighting
C1 rear spoiler
BBK front rotors and caliper offsets,ther is no calipers for Yaris and the xB BBK does not fit
Rear brake disk conversion
Kaminari CF hood
Still not sure if I want a body kit or not,car sits low as it is,but there are two nice kits out for Yaris from Taiwan,JDM kits that are being shipped to supplier in USA,they are not expensive honestly but gettign it all painted would be,so may just go SEibon CF kit to save on painting....
I figure it will take 24 months to scrape together all the parts....but I should be able to at least goto shows and represent by summer.....
That is all.....
#2630
Senior Member
Balliztik
SL Member
Thread Starter
Join Date: Jun 2007
Location: Washington
Posts: 9,538
Well today something from Sparco arrived,soon one more thing from Sparco will arrive,then one final thing from Spaco will arrive in about a month or so,then something from Samco will be here in about a month......so far everything i found used on either craigslist or on ebay,yaris parts are fairly cheap,much cheaper than tC parts.....
Soon as I get a dry day my GReddy parts go back on.......
I expect to be at least partially show ready by spring,wont be doing a BoB or any big shows for a long time.......
Soon as I get a dry day my GReddy parts go back on.......
I expect to be at least partially show ready by spring,wont be doing a BoB or any big shows for a long time.......
#2632
Posting again...
Monday my Fig grills come, and my APT/VRD fogs will arrive in "varies" says the ebay auction.
Next up is TRD Rear Sway, adjust lower, align car, try and get my fenders rolled sometime.
...and of course taking more pictures!
Kami Flush Mount is on my list, as is a Kami CF Hood and even the SC.
Monday my Fig grills come, and my APT/VRD fogs will arrive in "varies" says the ebay auction.
Next up is TRD Rear Sway, adjust lower, align car, try and get my fenders rolled sometime.
...and of course taking more pictures!
Kami Flush Mount is on my list, as is a Kami CF Hood and even the SC.
#2633
Im going to try and put my trunk together this weekend! lol. Think I have most of the parts by now.. gots to bake some headlights, switch the lenses and add some cf eyelids...HOPEFULLY get my intake and engine cover painted as well.. we will see how far I can get... Ill probably end up calling Brian or Erik when I break something.. but Ill try. lol.
I really need to meet this "optional" person. You post alot, Yet ive never met you. Sadface. haha..
I really need to meet this "optional" person. You post alot, Yet ive never met you. Sadface. haha..
#2637
Well Lets See I Got Work Wheels Sitting On My Floor with no tires , TRD Rear Sway Bar and Lowering Springs also close by, Going To Be Placing An Order For LED Swap, IDK Why I Want Red Under Glow Just To Be A Douche, Sending My HVAC to be painted next week and then recaro seats and also been searching for 08 projector headlights but I may just go to toyota and buy them and then an HID kit..... that's what i'm working on . I almost forgot i have a scion navi unit too
#2638
Posting again...
Monday my Fig grills come, and my APT/VRD fogs will arrive in "varies" says the ebay auction.
Next up is TRD Rear Sway, adjust lower, align car, try and get my fenders rolled sometime.
...and of course taking more pictures!
Kami Flush Mount is on my list, as is a Kami CF Hood and even the SC.
Monday my Fig grills come, and my APT/VRD fogs will arrive in "varies" says the ebay auction.
Next up is TRD Rear Sway, adjust lower, align car, try and get my fenders rolled sometime.
...and of course taking more pictures!
Kami Flush Mount is on my list, as is a Kami CF Hood and even the SC.
Next week is going to be a good week for my car haha. Thinking of getting some BlueBat Vinyls too, to smoke the top and the circle of my tails and an eyelid and a yellow overlay for the APT/VRD fogs.
Also need to roll my fenders like mad, I'm rubbing like crazy. Also the suspension is making some weird noises, need to check that all out, probably will have time tomorrow afternoon.
Last edited by optional; 01-16-2010 at 11:19 PM.