So who is working on anything new.........
#2701
Found out it's the 98.65 part from the ScionLife tech/repair manual and the list from toyodiy.. gonna see what my ex-toyota employee friend can get it for.. Ugh.
It's my fault it's messed up so I guess that's what it'll cost.
It's my fault it's messed up so I guess that's what it'll cost.
#2702
Senior Member
Balliztik
SL Member
Thread Starter
Join Date: Jun 2007
Location: Washington
Posts: 9,538
It would be fun to pull up on anything and walk all over it,at least once you hit 3rd gear and stopped spining.....lol
#2703
Bought a 22mm socket and an 18in long, 1/2in drive breaker bar at Sears on the way home from class tonight.
#2704
I DID IT!
WOOO!
Got that new strut top in and the new front strut bar on, using a temp nut in the front cause Toyota had to order mine, but it's torqued to spec so I'm happy!
Feels and sounds like everything is just fine! WOO!
I feel epic right now.
Thanks Josh for telling me about Tacoma Screw and being my carpool buddy and for holding stuff when I didn't have enough hands!
WOOO!
Got that new strut top in and the new front strut bar on, using a temp nut in the front cause Toyota had to order mine, but it's torqued to spec so I'm happy!
Feels and sounds like everything is just fine! WOO!
I feel epic right now.
Thanks Josh for telling me about Tacoma Screw and being my carpool buddy and for holding stuff when I didn't have enough hands!
#2706
MT or AT? I suspect MT from what you've been mentioning you drove before and all your track time.
Also as far as I know the intercooler pipes will have to be custom made, as there is no kit for it, but it should be good for 220-240 wheel horse power with a tune and a 9.5lb or 11lb pulley from NST.
Also as far as I know the intercooler pipes will have to be custom made, as there is no kit for it, but it should be good for 220-240 wheel horse power with a tune and a 9.5lb or 11lb pulley from NST.
#2707
might be able to push the sc to make better boost.
honestly i would just go aftermarket turbo, like a descendant kit(comes with everything.
i would say ask this question in the FI (forced induction) boards, but be prepared for no help whatsoever from anyone in there.
the search function is your best friend on this site and a good way to keep on the mods good sides. see if it hasn't been asked before and if not post away in FI or send a pm to someone who has done something similar to what you are looking for.
happy hunting!
Last edited by alienvictim; 01-23-2010 at 06:08 AM.
#2708
I DID IT!
WOOO!
Got that new strut top in and the new front strut bar on, using a temp nut in the front cause Toyota had to order mine, but it's torqued to spec so I'm happy!
Feels and sounds like everything is just fine! WOO!
I feel epic right now.
Thanks Josh for telling me about Tacoma Screw and being my carpool buddy and for holding stuff when I didn't have enough hands!
WOOO!
Got that new strut top in and the new front strut bar on, using a temp nut in the front cause Toyota had to order mine, but it's torqued to spec so I'm happy!
Feels and sounds like everything is just fine! WOO!
I feel epic right now.
Thanks Josh for telling me about Tacoma Screw and being my carpool buddy and for holding stuff when I didn't have enough hands!
#2709
Senior Member
Balliztik
SL Member
Thread Starter
Join Date: Jun 2007
Location: Washington
Posts: 9,538
it was good to see Tyler proud of his first suspension install and repair......i remember being young and afraid to tear into a car cause i had no clue how to get the job done........soon he will be a old hat at it like the rest of us....
#2711
I'm installing some RED LEDs on the interior, starting to run my audio wires, and laying down sound deadner in the doors and the floor pan. We are also helping our newest chapter member install TRD springs on his 06 xB. AND.... a few more mods as well. THEN... BBQ and THEN.... HOCKEY GAME. Busy yet FUN day ahead.
#2715
(me see's powdercoat, spraypaint or chroming. which is it dave!)
okay needed to adjust my binoculars. apparently you are polishing them.......lol
okay needed to adjust my binoculars. apparently you are polishing them.......lol
Last edited by alienvictim; 01-24-2010 at 03:36 AM. Reason: im blind
#2716
random question cuz i happend to see a show recently talking about the same style mark 1 GTI rims...
is the thickness between the "P"s 8 or 10 mm?? apparently between the first and 2nd+ model years... they changed them with 8 being year 1
is the thickness between the "P"s 8 or 10 mm?? apparently between the first and 2nd+ model years... they changed them with 8 being year 1
#2717
they also came on porsche in 5 lug
#2719
oh hey a little tip on that, if you use a heat gun while rolling your fenders your paint is less prone to
fracturing and chipping while being rolled. just dont cook the paint, too much heat and it may bubble.
and if it does chip buy a cheap 1 dollar can of wall mart clear coat spray paint. and shoot it over
the chipped areas or bare metal.
it will keep your frame from developing cancer down the road.
heat gun harbor freight 20 bucks, making your fenders look professional (PRICELESS)
fracturing and chipping while being rolled. just dont cook the paint, too much heat and it may bubble.
and if it does chip buy a cheap 1 dollar can of wall mart clear coat spray paint. and shoot it over
the chipped areas or bare metal.
it will keep your frame from developing cancer down the road.
heat gun harbor freight 20 bucks, making your fenders look professional (PRICELESS)
Last edited by alienvictim; 01-24-2010 at 04:31 PM.
#2720