STCxB

Hahaha if I had any kind of pressing deadline, I'd be working on it non stop. But I figure there's nothing to be gained by soldering in single digits right now. And I HATE the cold. Haha

Hayes

You have 7 days to finish it. Your hard deadline is the meet on the 20th.

xB_Toaster

I second that motion lol

goldtoaster

Your deadline is the 20th, if you don't have it done by then I'll come and take it and put it on my car.
You've been warned

Hayes

STCxB, how's that for motivation?

Hayes

Does anyone have a hookup for Dynamat (or similar product)? ALso, any experience installing? That's the next thing I would like tackle.

DaWiz711

Hit craigslist up, i know I've seen some up on there locally. I can help you on the install, did my own and my wifes. Sounddeadenershowdown.com is worth the read before you take the plunge.

In other news, the aluminum material for the gen 2 ***** should only run 30$, barring anything drastic behind the **** face. I will know how much machine time is involved after I get the protos made. So to whomever is willing to dig into thier dash, their machine time will be free.

I only need one set to look at, but for those who miss out (or don't want to pull their dash apart) I will be doing RMSC discounts, plus you wont pay for shipping!

Sent from my GT-P1000 using Tapatalk 2

STCxB

We shall see...

STCxB

OH! The inside of my doors are all dynamatted up! It's a pain to learn how to do it, but it's completely logical, at the same time. I can talk you through it some time.

STCxB

You might try looking at LEDMod.com. They have custom gauges up, and they offer the HVAC *****. You might be able to find a "blueprint" for those on their site.

Hayes

Daniel and I are going to do a mod day later in the spring/summer to install his spring on his tC and the dynamat material in my xB. On his recommendation, I am going to use the same product that he did. It's about 90 bucks for 100 square feet. I am going to mat the entire floor from the dash to the hatch, all four doors, the rear hatch and the roof. I'm thinking at least 200 feet will be needed, so that's where I will start. We will start with the floor, and cover whatever we have left. If needed, I will stop and order more.

LSBoogie

90 bucks for a 100 sf doesn't seem bad. What brand if you don't mind me asking? This is on my car bucket list as well.

Hayes

I think it was called fatmat. It's from ebay. Daniel used it for his car and highly recommends it.

jandones09

Alright count me in on Sunday the 20th. Hayes and I are going to meet up in the morning and then Cruz up .

Hayes

If anyone from Aurora/Denver/Westminster area wants to join us early and cruise up, let us know.

09TC5M

I'm hoping the weather remains clear until after the meet. I still need to get an alignment done on my tC, hopefully I'll be able to get it scheduled tomorrow or Wednesday.

xB_Toaster

According to weather channel it's suppose to be mid thirties but not snow for the week or so. Hopefully that holds true. If so do you want to meet at the mall as usual?

09TC5M

xB, yeah that would work.

xB_Toaster

Ok cool 10:30 work? That may be a bit early...

09TC5M

10:30 would be fine.