*Yanki01's HID Retro Fotoshoot! 56k....?*
#81
Senior Member
SL Member
Thread Starter
Join Date: Jul 2005
Location: Corpus Christi, TX
Posts: 8,776
Originally Posted by InfiniteVisi0n
yo do you have any pictures of the retrofit for the o8 heads on a tC?
http://high-intensity.org/forums/showthread.php?t=553
#83
Senior Member
SL Member
Thread Starter
Join Date: Jul 2005
Location: Corpus Christi, TX
Posts: 8,776
i dont think you have to, but i bought all my parts to save some money. I wanted an almost brand new set of headlights and I originally bought a set off of here from a member (wont say their name) claiming to be in good clean condition. only to get them with the lense scratched and pits all over the lense. they wouldnt refund the money back, so i sold them and lost about $20 on the deal. 2nd time i bought another set on here claiming to be the same, once i get them one of the tabs was broken and the repair job was crappy and on the other headlight, it was a different brand? Sold them back on here and lost another $10-15? FINALLY got a MINT set on ebay that he just bought the tC and swapped them out for ebay projectors and got them for about $150 shipped! If your patient enough, you can find some good deals, just have to becarefull. for me buying my parts i probally saved about $2-300? HIDPlanet.com/forums is another good place to look for parts or some sellers on ebay.
#85
Senior Member
SL Member
Thread Starter
Join Date: Jul 2005
Location: Corpus Christi, TX
Posts: 8,776
Originally Posted by Yanki01
right under $1k. I started gathering all the parts i needed for this retro back in February. I already had everything in mind i wanted so i knew what to look for. The things that i bought brand new were the 2nd set of headlamps, and BMW E46 replica shrouds. All the others were previously used in which it doesnt matter besides the bulbs and ballast. The bulbs had very little hours of use on them as did the ballast. i got some good deals on these parts. You just have to know where and when to buy them.
#91
Originally Posted by Yanki01
Originally Posted by Technitarded
09 projectors :-)
i wish mine had better range though the fogs add a nice peripheral light
#95
Senior Member
SL Member
Thread Starter
Join Date: Jul 2005
Location: Corpus Christi, TX
Posts: 8,776
mostly HIDPlanet.com/forums and eBay are the best places. if you have local junkyards you can check there for ballast, projectors and bulbs. but you need to know what cars to look for and they might hike up the price? projectors can vary from $100-450/set, ballast are normally $125-200/set. it just depends on what projectors, ballast, bulbs, shrouds, ect exactly you want?
#96
Yanki i got a question. on their website the prices say for example $625 including labor, projectors and E46 shrouds, so whats not included ? HID bulbs, ballast and wiring ?
can you PM parts that i will need ?
I sent them an email asking few questions, i'm really thinking about doing this after i get back from texas to NY but i think i have to start before i get back, lol since i would like to just come and pop them in with the rest of the stuff.
can you PM parts that i will need ?
I sent them an email asking few questions, i'm really thinking about doing this after i get back from texas to NY but i think i have to start before i get back, lol since i would like to just come and pop them in with the rest of the stuff.
#99
Senior Member
SL Member
Thread Starter
Join Date: Jul 2005
Location: Corpus Christi, TX
Posts: 8,776
Originally Posted by BlckdOutTC
isnt the light output supossed to go straight ? on the pic from the side, it like slopes down the wall i thought it was suppossed to go straight the whole way
#100
Senior Member
SL Member
Thread Starter
Join Date: Jul 2005
Location: Corpus Christi, TX
Posts: 8,776
updated pic, always wanted to take a foggy night picture with the cutoff. i need to get in a big field where it really gets foggy to get a better pic but this is in front of my house. only if my neighbor could turn off his porch light. 1yr later and still rocking this retro!!!