GQQSE13

i'm ____ed i went and installed and got bumper back on and yet i can't find how to wire the switch for them. don't see the relay nor where to plug in the white part of the harness....any help?

DJ08tC

I will have a pic up in a minute.

DJ08tC

In the red circle is where the 7 pin connector should plug in. I am not totally sure where the relay is so maybe someone else can point that out.

GQQSE13

yea i found it thanks to a uddy. it was somehow wrapped around with other wires off in the back that i could not see. thanks for the help !

DJ08tC

No problem, did you get everything hooked up? I can't wait to get mine!

GQQSE13

yep. and work good. weird thye gave me the H3 7000k bulbs and i installed them but they sure as hell dont look anything like my HID 6000ks but oh well

DJ08tC

Yea the ratings for regular bulbs are weird. They are no where near what HIDs bulbs are rated at. I am getting them and going to get the Nokya 2500k ones that are yellow.

JDis3

so there still isnt a tutorial thread? to install these with pictures?

GQQSE13

there is. its for the oem ones (one sin the grill).
quick run down:

1take off bumper
2take those 2 plastic pieces of (just pinch in 2 sides and push right out)
3 put a fog in each one
4. connect the wires to the wiring harness
5. (after disconnecting battery) plug in the main part of harness to the plug located next to the CAI filter
6 ground the white wire to a peice of metal near it (there is one near the plug)
those are about th eonly differences from the OEM

BlckdOutTC

iTrader: (1)

you do not need to remove the bumper, just the splash guards undernead the bumper so you have access to behind the fog light slots

dqlostsoulz

iTrader: (3)

I just brought a set . Does anyone have a link to get a set of good bright white h3 bulbs that are comparable to HID"S that wont fry my harness??

pain

help...!! ok so I installed it perfectly fine and when I connected the car battery back, the horn went off pretty loud..kind of sucks....well, dunno if that has anything to do with anything but my passenger side windows don't open/close from my controls on the driver side, and i have all auto windows...the passenger side doesn't open/close automatically anymore...anybody know a fix? thanks!

pain

ok nm...i just learned how to reset it....put it in the close position for 2+ seconds and it works

JDis3

same this happend to me when we installed my gf's fogs. same fix though, just need to reset them. i was about to make a DIY so there would finally be one because i know this forum hasnt made one yet but i got lazy hah

BlckdOutTC

iTrader: (1)

yeah when you disconnect the battery, those get reset, but i just keep trying them until they work lol

muuunkeeyy

i remmeber when i did this, i just left it alone for a couple of hours and it reseted by itself somehow lol. i forgot i didnt have access to passenger side

zombierunner

i got my apt fogs and waited until i got my yellow lamin-x yellow 14mil thick tint they turn out very nice. then i installed them and everything went great my install went like this:
1. disconnect + battery
2. take out driver side panel and take out black plug.
3. wormed my hand down and took out plastic plug on passenger side attached ground to bolt on driverside (other grounding wires were there.)
4 ran wiring to both sides and plugged in fogs
5 plugged in on/off switch.
6.checked, and worked.

then today i went to open sunroof and nothing it would not open. also my doors also lock after about a minute. will be searching but any help will be appreciated.

CRUZtc8

^did you try disconnecting the battery?

zombierunner

sunroof mysteriously started working but i then noticed passeger window will not roll down from drivers side controls but it will roll down from the passenger side. should i disconnect the battery again? btw this is a 08 if that matters.

Guille_Tc

You have to re-set the windows and sunroof.

Manually roll down each window halfway and then hold the up button for about 3-5 secs.

For the sunroof what i do is just hold the close button for about 10 secs and u should hear a mechanism sound.

^^ If that doesnt work, read the owners manual for the exact instructions on how to reset the system. Hope it helps.