Body Kit Install Complete!! Pg 8 for photos! New shoes!!
#161
Originally Posted by MJVsTC
The top of the bumper (above the grille) looks warped. If you look at the line between the bumper and the hood you can see why the grille looks "shorter" on the left side. I don't know anything about bodykits so I can't give any advice on how to fix it, but it's really not that noticable.
#165
Originally Posted by tc2nut4
The sideskirts and rear bumper flow together pretty well but I'm really not sure about the flow with Tury's M3 front bumper. I guess I'd have to see it personally.
Considering the body parts you have chosen as a mixed combo, I kinda know the direction you're going with your cars setup. You seem to want the sophisticated look rather than the totally aggressive look. Aggressive is good but, in my opinion, too much of it doesn't look all great on TC's. Yours is a clean setup that I like and I may be doing the same setup but without the M3 front bumper. I'm thinkin' about the viniati fierce lip front bumper.
It flows yeah?
Well I'm glad you're car was the guinea pig. Glad I came across this on this site.
SCIONLIFE RULES!!!
#166
glad i could help. The fogs lights are now in and a custom grill is now in the lower grille and IMO it looks a 1000x better.
But you're right, sort of wanted a simple clean look without all the craziness. I think the front lip looks nice when its molded correctly. Good luck
But you're right, sort of wanted a simple clean look without all the craziness. I think the front lip looks nice when its molded correctly. Good luck
#175
Are you serious!?
Make sure you find someone who knows what they are doing so that you don't get scratched wheels. My stock wheels were all marked up from day one...I guess some idiot at the factory didn't know how to balance rims and tires.
Did you get the hyperblack Evos?
Make sure you find someone who knows what they are doing so that you don't get scratched wheels. My stock wheels were all marked up from day one...I guess some idiot at the factory didn't know how to balance rims and tires.
Did you get the hyperblack Evos?
#177
Originally Posted by MJVsTC
I got scared when I saw this shot...it looked like you put a big a$$ wing on your tC.
#179
Originally Posted by tc2nut4
hmmm not sure off hand what paint they used... i know it wasn'y SWA... please elaborate on "burning it in"
you basically tape it off like in the pic above and you stop your cleacoat just short of the paper. Kinda like when you blend basecoat but with the clear so its a little dry. Then you take your blend solvent(which burns it in/melts it)(SWA uses a product called BS10) and spray it over the the dry spray of the clear coat and it basically melts it in with the old clear. When its done right it doesnt look bad at all but will show up later down the road. It will look like dry spray. Im not sure if other paints like ppg or sikkens or dupont do it but i know that sherwin does this. Hope this helps.