rhythmnsmoke

How come I dont' see any topics on the Buddy Club 2 kit.







The only other kit that is clean is the Kaeon Kit. But it lacks somewhat aggressiveness. But the BC2 kit I think is clean, but yet still aggressive enough to look like it didn't come stock on the car.

onefunkyfreshdj

i like it... that would be one of my choices for a clean kit.

CreativeCompacts

Because our molds are taking forever to get produced... The photos you have posted were in March when we made the kit. Our molds have been delayed so much I am about to consider a new manufacturer... Latest update I had was about 6 weeks but even I am unsure about that.... I really need this kit instock asap... I am in desperate need of a rear bumper.

James

rhythmnsmoke

Well, heck man...Go ahead and switch to a different manufacturer. Because I honestly think this is Clean and Aggressive at the same time. Everthing else sits on the end's of extremes. They are either too clean, and too simple, or they are UN-goddly horrible kits that mess up the flow of the car. But this one, plays the balance of Clean/Aggressive real good. You have my order if you can get this one off the ground.

Scievolution85

nice kit, very clean

bodjie

Yeah, I like this one too!! Is this gonna be made of urethane? I'm definitely sold if it will.

designone

I like this kit......it isnt to aggressive looking with a bunch of flairs

mr_lore

I'd like to see some conceptuals on what the side skirts and bumber look like b/c its nice looking so far.

teksno

this kit really needs to be urathane... i believe the only urathane kit is the raven one and well... if my car could transform into a giant robot with a big laser then yeah... id buy the raven kit. other wise... im waiting for a good urathane kit. but im not holdong my breath.

edit********
i forgot about the kaminari(sp?) kit but i still think its ugly, though i want a CF hood with the scoop... thats hot.

CreativeCompacts

THe kit is being made out of Aero Flex... Not the exact same as Poly Urethane, but real close.

rhythmnsmoke

Same place I got the last pics...

PunkInDrublic

Please make the rear bumper friendly with off-set exhausts (HKS Hi-power)

aarontrini85

i dont see an hks fitting in there or even my injen but who knows lol we can always hope

rhythmnsmoke

I don't see that as being too much of a problem. You could just have the body shop cut the hole big enough to fit your angled exhaust.

CreativeCompacts

Ya we have made the bumper to fit the stock exhaust and our exhaust kits perfectly... All other Axle Back Fart Can Exhaust kits, you will have to modify the rear.

LIKE_OR_AS_GOD

Just like you need a rear, I need a front. Though I keep putting off getting anouther stock one cause I'm trying to see if any one comes out with a more clean looking front bumper. I like this one, but don't like the side skirt.s

teksno

like i said im not holding my breath...

bodjie

I'm with you on this.

daewonder

not bad. i like it better than all the kits i've seen yet.

mr_lore

indeed, very promising. now if its reasonably priced i think i may pass along yet some more hard earned coin in CC's direction.