HID installation help
#1
HID installation help
Anyone near the kissimmee area that is good at installing HID's.. just got mine in today and completely clueless on how to install them and slightly paranoid of screwing things up...
I'd even be willing to pay(let me know your price) or trade services...
I'd even be willing to pay(let me know your price) or trade services...
Last edited by crazishaun; 12-14-2009 at 11:00 PM.
#2
Hey bro they are really easy pretty much plug and play here is a diy...
https://www.scionlife.com/forums/sho...d.php?t=165666
https://www.scionlife.com/forums/sho...d.php?t=165666
#3
Hey bro they are really easy pretty much plug and play here is a diy...
https://www.scionlife.com/forums/sho...d.php?t=165666
https://www.scionlife.com/forums/sho...d.php?t=165666
Thanks.. honestly i've gone through a bunch of different instructions and i'm still lost.. i see where everyone says its easy as pie.... but for me its quite the opposite..
#4
What are you having trouble with?
1. remove your low beam bulb
2. connect the end of one of the wires to where the bulb was and the other end to the ballet.
3. Then connect the wires with the bulb than reinstall the new bulb.
4. do the same on the other side then put the 3m pad on the ballets and hide them some wher on the car.
1. remove your low beam bulb
2. connect the end of one of the wires to where the bulb was and the other end to the ballet.
3. Then connect the wires with the bulb than reinstall the new bulb.
4. do the same on the other side then put the 3m pad on the ballets and hide them some wher on the car.
Thread
Thread Starter
Forum
Replies
Last Post
clickclickw00t
PPC: Interior / Electronics
2
02-18-2015 08:57 PM
TheRedBox
Scion xA/xB 1st-Gen Drivetrain & Power
31
12-02-2003 04:53 PM