nauticac

Hey all, I just received my HID kit from MobileHID. However, do I have to drill my inner fender to mount the brackets for the ballasts. It came with screws but I'm not sure If I have to drill an area someplace to mount them or if you all mounted the ballats a different way. Please help asap I'm anxious to install asap!

KINGxOFxSKA

nauticac

ahhh I did lol but must not have been using the right keywords!

flint_scion_tc

why dont you ask cliff for help...he will tell you what the screws are for and where to mount it...he will answer all your questions

scioncraze05

don't worry about the screws and brackets. Get some Heavy Duty Double Sided tape and put it on the back of the Ballasts and put them on the inside of the front bumper support in front of the radiator. Thats where mine are, they are out of the way and away from water and what not.

mwuf15

get some velcro. they work the best.

ha-y-onscion

^^^yup last week I was wondering the same thing. And I searched and found the best way for me was Velcro. I got it at home depot about $3. easy to do. I also have the mobile HID kit...awesome! here's the link I followed

https://www.scionlife.com/forums/vie...ht=hid+install

however the bumper removal is not necessary.

nauticac

thanks guys. I got them mounted using heavy duty velcro. Works great and the install was very fast!

Viace

zip tie them, i havent had any problems

Neothin

3m double sided tape!

Nephi

best way to mount them is to put them back in the cardboard box they came in and spare everyone from your glare.

Noodle

depending on what ballast you're using, make sure you avoid metal contact.

nebster

here i took some pics for you. used some beefy double sided tape and it works well