problems with parking lights *pics*
#1
problems with parking lights *pics*
So when I was taking my parking lights out, couple minutes later, they ended up at the bottom of the headlights
ah.. well I was sticking my finger through the Highbeams and using my finger to flick the light out. It worked but, now I have a bulb on each side of my headlights just laying there I had my new parking lights ready to go in but... I'm not going to even try
Is there a way to take them out? Other than taking out the whole headlight and flipping it upside down so the bulb will fall out? DON'T LAUGH AT ME!!
ah.. well I was sticking my finger through the Highbeams and using my finger to flick the light out. It worked but, now I have a bulb on each side of my headlights just laying there I had my new parking lights ready to go in but... I'm not going to even try
Is there a way to take them out? Other than taking out the whole headlight and flipping it upside down so the bulb will fall out? DON'T LAUGH AT ME!!
#4
Oh wow. Hmmm. What I would try. Get a straw or something flexible. Put some tape on the other end and try and get that sucker stuck on the tape. Worst comes to worse, Take the headlight off and shake it out.
#8
magnetic tip thing would be perfect right? I am sure there is some metal on it, and im sure all of use shop boys has an expandable item just like it... small enough to fit in the hole... I am im sure not more than 2 bucks at any shucks.
#14
Sears sells a flexable grabby thing tha you could put in the hole and grab it.......cost like $15.........first try the vacume thing..........then try the coathanger with gum........then take off bumper and light.........tops 1 hour to remove shake out light and reinstall everything..........it is very easy..........unless it is raining,snowing or dark........
#16
haha well i was using double sided tape with my finger until it rolled out of the highbeam housing, thanks guys. I think i'm just going to try that vaccum with some small tube or something. Or... double sided tape + clothes hanger blah. LOL
Also, How do you guys manage to stick the bulb in the parking light socket! its so fricken annoying and small!!@#%!
Also, How do you guys manage to stick the bulb in the parking light socket! its so fricken annoying and small!!@#%!
#17
I'm wondering how the heck you managed to do this in the first place. The bulb is supposed to come out still attached to the socket. It just takes a twist to get the socket out, and then you can bring it up into the daylight and use two hands to pull apart the bulb from the socket.
I actually cannot comprehend how you did this.
I actually cannot comprehend how you did this.
#18
Originally Posted by RodC
I'm wondering how the heck you managed to do this in the first place. The bulb is supposed to come out still attached to the socket. It just takes a twist to get the socket out, and then you can bring it up into the daylight and use two hands to pull apart the bulb from the socket.
I actually cannot comprehend how you did this.
I actually cannot comprehend how you did this.