DMC0585

any updates yet?

jimmyjun

yes sir, car before cams had 201whp and 175wtq. it now has 205whp & 185wtq fully tuned with both apexneo for a/f ratio & camcon for vvti. gains were only 4whp up top but we gained up to 15whp on the whole powerband. we also gained up to 20wtq on some areas of the power band. Peak torque moved from 4krpm that was before to 5krpm. i dont have the graphic with me because the guy that help me tune the camcon has it and he lives about 1hour away, but i do have a graphic that has cams tuned only with the apex afc and no camcon tuning. if you want to i can post that one............

Aspekt

ahhh the long awaited update.....

keep them coming!

myr6goesfast

iTrader: (2)

Muy firme mijo

jimmyjun

this graph shows the cams installed and tuned a/f by the apex neo, no vvti tuning. the 191whp was when we got to the dyno with the cams untuned (very lean afr's). and 199whp with cams tuned afr's only. like i said before no camcon tuning on this graph. i'll try to post the 205whp graph with afr's and vvti tuned once i get it from my friend. the car feels so much quicker than before...

jimmyjun

grax!!!!!!!

p.s
i wish i had installed the stage 3, i would have seen at least 210-215whp. remember that this is on a head that still has no valve angles, no oversized valves wich will yield greater result with the stage 2 and stage 3 cams

super_white2010

Great numbers bro! So there is power on a VVTI controller?! nice! Como corre el mostro ese?

jimmyjun

deff there is some power out of a vvti controller. it runs great!!!!