ALPHAWERK 60mm throttle body....
#21
Originally Posted by TurboCustomz
Glad I could have helped. If you were the guy I got frustrated with, please accept my late appology. If not, disregaurd.
Don't be sorry, Im not.
Charles
Don't be sorry, Im not.
Charles
#23
Going to big will definately make you lose power but who says 60mm is too big of a tb for a 2.4L doesn't know a lot about engines. Even a 62 mm would help. Because the tc has a bigger engine I would use a 65mm for forced inductions not a 60mm. Like I said before I had a honda civic. It was just a 1.5L non v-tec the stock tb was a 55mm like our cars. I had the i/h/e and then I used a larger tb 62mm there was significant gains. I gained 3/10 in a 1/4 mile with the tb after the other mods.
#27
Alphawerk's TB is a stock bored-out one with a larger butterfly. 60mm is the largest you can bore the stock TB. I remember they had issues since our TB's are electronically controlled and is an integral part of our VVT-i system. Something about the car idling bad or stalling or the like.
Thread
Thread Starter
Forum
Replies
Last Post
Blunderbuss
Scion xA Owners Lounge
2
10-08-2015 04:56 PM
rancur3p1c
Scion tC 1G Drivetrain & Power
1
07-12-2015 07:59 PM