big bore throttle body
#41
I was e-mailing back and forth with him for while. But he asked if I had an aftermarket intake on and I told him I had a stock intake and then the e-mails stopped coming back too me! So I am asuming he doesn't want me to come up anymore! So I hope someone else has more luck than I did! (assuming this is for real!) The last e-mail I got from him was that he asked for a picture of the TB and then it would be about 1-2 weeks and I was supposed to drive up on the weekend we planned. But that was the end of it and it has been a few weeks now, so I gave up on him!
#42
There's gotta be some pictures of the TB floating around the forums now that ppl are getting into engine builds. Let's get him what he says he needs and that's all we can do. Also maybe people interested should CC: eachother e-mails. Send PMs for email addresses so we don't get spam.
#43
I have just heard back from a scionlife member and I think we have a taker!
Can anyone else e-mail me a picture a top down veiw of the throttle body with the intake tube removed???? kevin@blackdiamondracing.com
Can anyone else e-mail me a picture a top down veiw of the throttle body with the intake tube removed???? kevin@blackdiamondracing.com
#51
OK, here is the update. The spacer is done and ready to be installed. For now it will only work with aftermarket intakes. This is due to the fact that the RX8 TB has a 3" mouth. The kit will include a intake reducer hose to go from 3" to 2.5" which is what most aftermarket intakes are made from. Since cmcpride and pinkyfmTC have aftermarket intakes already I would like to use one of these cars for the test. I will be contacting these guys later today and we will try to get this finished up ASAP!
Thank you to all who have helped with this and volunteered there cars!
Thank you to all who have helped with this and volunteered there cars!
#52
Senior Member
SL Member
Scion Evolution
How much would the spacer cost, and how much for the throttle body at a near junkyard. Also, is the drive-by-wire in our ECU okay with the change of throttle body?
#54
Will you be selling the spacer individually once you get the test-fitment finished? I work for Mazda so the TB comes at a low price for me, so what cost would the spacer be itself?
And this will NOT require any modification to an aftermarket CAI system?
And this will NOT require any modification to an aftermarket CAI system?
#55
Assuming the fit is good AND the car responds well to the modification...I will make a batch of them to sell. So far it looks like I would need to sell them for about $125/kit(including spacer/adapter, intake reducing hose, hose clamps, modified bolts, vacuum line fitting and possible a coolant line extension). There are 3 used RX8 TBs on ebay right now for $250 each, but maybe you can do better.
#56
Senior Member
SL Member
Scion Evolution
WOW, 375! tHAT's AWSOME! and it's 70mm. Nice. The only thing that is bothersome now is the Intake Mani, for better flow, we would have to port it to almost the same. Cool, non the less.
#58
Update; the kit is complete and I am working on getting it tested ASAP! I put a couple of pictures up on our website on the photo page. here is the address;
http://blackdiamondracing.com/photo_page.html
http://blackdiamondracing.com/photo_page.html
#59
Originally Posted by blackdiamondcnc
Update; the kit is complete and I am working on getting it tested ASAP! I put a couple of pictures up on our website on the photo page. here is the address;
http://blackdiamondracing.com/photo_page.html
http://blackdiamondracing.com/photo_page.html
Can't wait to see the results!
#60
Originally Posted by blackdiamondcnc
Update; the kit is complete and I am working on getting it tested ASAP! I put a couple of pictures up on our website on the photo page. here is the address;
http://blackdiamondracing.com/photo_page.html
http://blackdiamondracing.com/photo_page.html