Cost for a resonator and installation on mid-pipe on tC
#1
Cost for a resonator and installation on mid-pipe on tC
I searched like crazy and, I cannot seem to find out how much it should cost for a resonator to be welded onto the stock mid-pipe of the tC. I stopped by Monroe muffler and brake here in Collegeville, PA. and they said that welding a resonator to our stock exhaust (which he said is really tough to do with our stainless steel mid-pipe) would not be an option, and that my only solution would be to buy a full magnaflow exhaust. It would still leave me with a ton of rasp and that damn thing is about $550 and would leave my Greddy Ti-C exhaust useless. If anyone knows of a place that will hook me up with a kick ___ resonator/ weld job near the Collegeville area it would be greatly appreciated.
#2
Um........they just wanted to sell you an exhaust.......
if it is the stock midpipe the cost including the resonator is gonna be at worst $100.
Stainless is no harder to weld than any other metal,so if it is an aftermarket midpipe,it can be welded by turning up the amps on welder like 10% tops.....
Goto another shop.
if it is the stock midpipe the cost including the resonator is gonna be at worst $100.
Stainless is no harder to weld than any other metal,so if it is an aftermarket midpipe,it can be welded by turning up the amps on welder like 10% tops.....
Goto another shop.
Thread
Thread Starter
Forum
Replies
Last Post
TheTripleC
PPC: Vehicles
1
01-04-2015 06:46 PM
TheRedBox
Scion xA/xB 1st-Gen Drivetrain & Power
31
12-02-2003 04:53 PM