mr_lore

This is an amazing part for the tC, it looks sexy as hell with my autometer nexus gauges. I like parts and suppliers that dont mess around.

Streeter

No doubt - maybe I'm unlucky but I'm having a really hard time finding suppliers that don't mess around. This is on my list of things to buy.

BrEaK_AwaY

it is a very good product, looks amazing in my tc with my gauges

Munch

Same here. You can't go wrong with this company. I've ordered many things from them already.

Marshall

You guys are providing such great feedback that I am really tempted to purchase this pod and do my gauge setup much sooner and that I planned. Speaking about gauges, I don't want to thread-jack but where are you finding good deals on gauges? How much did your current setup run you?
Thanks in advance...

BrEaK_AwaY

i got all my gauges off ebay

pillar pod $60
autometer CF voltmeter $45
autometer CF oil pressure $50
autometer CF vac/boost $60

grand total minus shipping $215

CreativeCompacts

We are in the process of adding all the gauges to our website at this time... Since there is so many options for gauges, it is taking us awhile.

Munch

Summitracing.com and jeg.com have the best prices on gauges anywhere.

ScionDad

Got my pillar today SWEET, I just ordered it Friday

CreativeCompacts

We may of had a bad track record on getting the item instock as mentioned, but once instock, I don't mess around... Order comes in, item goes out!

Right now we are awaiting our next shipment of pods... we sold over 20 pods in 2 days... So at this time I have 2 on backorder till thursday or so

James

ScionDad

James, you guys have always done me right..... I just opened it up and THIS IS THE SIZZLE. Wow. talk about a great product. Props to who ever designed it.

BrEaK_AwaY

agreed sciondad, have you installed it yet? it is a great fitment and color.

i got my gauges sittingin mine... i just need to hook them up =\

ScionDad

No, I just got it. I'll install tonight. Is it easy? I was looking at the Autometer CF like you have or Autometer cobalt. How do you like your CF? What color do they light up at night?

BTW, I seen your ride in the other thread...

BrEaK_AwaY

thank you for the kind comment on my tC

as for the install, here is my DIY https://www.scionlife.com/forums/viewtopic.php?t=78382
very simple install, just you just gotta use a little thumb force to get the bottom corner to fit inbetween the factory a-pillar, and dash. you will see the area i am talking about in my DIY

i havent even wired the lights for my gauges yet, but i would think the lines light up an amber color, and the numbers light white (that is the color on the face without the light lit, and its a bulb, not LED, so i would assume it would cast those colors). the needle is a silver medel, so i dont believe they lights up. but i am very happy with how they look, you can see pictures of them in my DIY in the link above

ScionDad

Thanks for the info...I ordered the Autometer series - Boost gauge, AFR gauge and EGT gauge. That should cover any fears of running lean.

This is a great blurb from overboost.com

Ideally there are three different gauges you should have when you embark upon this project. First and foremost is an aftermarket boost gauge. Decent units are made by Autometer for about $40. Best thing is, these units read in ENGLISH, that is, in PSI. These gauges will tell you what kind of negative and more importantly, positive manifold pressure your turbo is creating.

Next is an air/fuel ratio gauge that will tell you how far you are from having a stoichiometric mixture by reading the signal coming from your O2 sensor..

Finally there is the EGT (exhaust gas temperature) gauge. When an engine is in good running order, it should be at about 1450 degrees Fahrenheit. Temperatures below that will indicate a state of richness, and temperatures above that will indicate a state of leanness (BAD). An EGT gauge is essentially a voltmeter that displays the output from a thermocouple, or pyrometer, that sits in the exhaust stream and converts heat to an electric signal.

A full complement of these gauges, coupled with some good common sense, will go a long ways in keeping you from turning your motor into a metal foundry.

wowguytc

so have you got these back in stock becaue im ready to take one of your hand ASAP?

PoizentC

Same here. Is the Creative Compacts site still up? I haven't been able to access the page.

ScionDad

Sooo, whatcha guys need gauges for...I smell power

CreativeCompacts

Have over 40 instock... site is up and running or call 1877SCIONTC

-Keith-

Please update the first page so we can see final product without going through page after page