id003

Im having trouble getting the stock midpipe off. Cannot for the life of me get the two bolts connecting to the s-pipe off. Wondering if maybe im missing something or if anyone had any tips beside using WD-40. I know this may sound stupid, but cant get it to go...

SquallLHeart

tried PB?

id003

PB...?

theblue

.peanut butter...lol

id003

Ill try to find one thatll fit, dont have too many tools

SquallLHeart

http://blasterchemical.com/display.cfm?p=50003&pid=4

hyperwhitetc

pb blaster. good stuff, did the trick for me. and no i didnt take this pic haha

id003

Im guessing that its a better bet than the wd-40. Ill see if i can find get some tommarow

ihavenosn

PB Blaster works wonders. You can find some at any Kragen, Pepboys, Autozone or even Home Depot.

tCeeder

iTrader: (1)

i always have better luck with WD40..

anyway, use leverage to your advantage! put a long pipe around your wrench and try loosening, should come right off. i didnt have a pipe nearby but a PVC plastic pipe worked fine =p

DeuceCoupe

u want to let it penetrate for 10 mins. so soak all the bolts and come back to them later.