Ingalls Stiffy : Thanks Dezod *Pics*
#1
Senior Member
SL Member
Thread Starter
Join Date: Sep 2004
Location: Always In Front Of You
Posts: 2,834
Ingalls Stiffy : Thanks Dezod *Pics*
First off I would like to thank Paul from Dezod Motorsports for lettin me try this new product out that he recieved, and Ignalls for making one hell of a product, especally for a turbo car! I needed this BAD
Before the install the car seemed to have a lot of rock and the shifts weren't really all that smooth. So I got in contact with Dezod after I saw they had a nice huge Stiffy sale going on. Within 3 days I had a new Stiffy at my doorstep.
I installed it onto my car, gave it some nice "bling" action under the hood BESIDES the turbo haha. Then came "testing" it out.
I took my car out last night and ran it up to 7psi. I must say there was absolutely NO engine rocking at all going through the gears. Everything was smooth, I could definately feel the Stiffy doing its job as it was inteded to. We literally beat on my car last night testing it out... ended up killing a poor little RSX-S while doing so. We did numerous highway runs with it to beat it up and did some hard shifting on public roads that are secluded out here as well and there was just no engine rocking at all. No matter what I threw at it, it seemed to just hold its ground!
The install was pretty straight forward, the directions were very well typed from Ignalls and it took me no less than 10 mins to do the install.
Once again thank you Dezod for your normal speedy shipping and customer support and thank you Ignalls for make such a great product! Glad you two companies are a team!
Ingalls "Stiffy" Engine Torque Damper-tC 05-06
http://www.dezod.com/pd_ingalls_stiffy.cfm
Before the install the car seemed to have a lot of rock and the shifts weren't really all that smooth. So I got in contact with Dezod after I saw they had a nice huge Stiffy sale going on. Within 3 days I had a new Stiffy at my doorstep.
I installed it onto my car, gave it some nice "bling" action under the hood BESIDES the turbo haha. Then came "testing" it out.
I took my car out last night and ran it up to 7psi. I must say there was absolutely NO engine rocking at all going through the gears. Everything was smooth, I could definately feel the Stiffy doing its job as it was inteded to. We literally beat on my car last night testing it out... ended up killing a poor little RSX-S while doing so. We did numerous highway runs with it to beat it up and did some hard shifting on public roads that are secluded out here as well and there was just no engine rocking at all. No matter what I threw at it, it seemed to just hold its ground!
The install was pretty straight forward, the directions were very well typed from Ignalls and it took me no less than 10 mins to do the install.
Once again thank you Dezod for your normal speedy shipping and customer support and thank you Ignalls for make such a great product! Glad you two companies are a team!
Ingalls "Stiffy" Engine Torque Damper-tC 05-06
http://www.dezod.com/pd_ingalls_stiffy.cfm
#2
#3
I will likely be going this route as well. I was told that it helps out considerably. For some reason, I thought this went under the engine....I was worried about the install, but after looking at the pics, not so much anymore.
#7
GREAT REVIEW!!!!
glad you like the product!
You guys are going to poo when you see the 3 point upper front tower bar Ingalls is developing!!!
adjustable brace dampening, multianodized colors, built in damper bracket, 3 point to the fire wall(not the wimpy 2 point), basically the most advanced strut bar ever developed for the tc..
we also are getting the xa xb dampers done here in the next couple months....
glad you like the product!
You guys are going to poo when you see the 3 point upper front tower bar Ingalls is developing!!!
adjustable brace dampening, multianodized colors, built in damper bracket, 3 point to the fire wall(not the wimpy 2 point), basically the most advanced strut bar ever developed for the tc..
we also are getting the xa xb dampers done here in the next couple months....
#9
Originally Posted by BlkSandPrlTurbotC
Originally Posted by Schuller
Sounds like you had lots fun playin with your stiffy last night. Skeet Skeet.
#10
Senior Member
SL Member
Thread Starter
Join Date: Sep 2004
Location: Always In Front Of You
Posts: 2,834
Originally Posted by robstamina
GREAT REVIEW!!!!
glad you like the product!
You guys are going to poo when you see the 3 point upper front tower bar Ingalls is developing!!!
adjustable brace dampening, multianodized colors, built in damper bracket, 3 point to the fire wall(not the wimpy 2 point), basically the most advanced strut bar ever developed for the tc..
we also are getting the xa xb dampers done here in the next couple months....
glad you like the product!
You guys are going to poo when you see the 3 point upper front tower bar Ingalls is developing!!!
adjustable brace dampening, multianodized colors, built in damper bracket, 3 point to the fire wall(not the wimpy 2 point), basically the most advanced strut bar ever developed for the tc..
we also are getting the xa xb dampers done here in the next couple months....
I'll be glad to try the new stuff out haha :D
#12
Originally Posted by Schuller
Originally Posted by BlkSandPrlTurbotC
Originally Posted by Schuller
Sounds like you had lots fun playin with your stiffy last night. Skeet Skeet.
#19
Originally Posted by Prototype_xB
i love mine but the vibration and chatter pulling out in first gear from a stop is killing it for me.
ya? no?