Loudest exhaust
#41
Originally Posted by scholarbb
Originally Posted by rhythmnsmoke
Originally Posted by scholarbb
Aluminum flywheel supposedly adds a lot of power too. Never used one yet. Should ship tomorrow. Only thing is install can get expensive.
Not trying to be a poop, but flywheels don't add power. Due to being lighter, it's less rotating mass, which in turn allows the engine to "deliver" better power.
Yeah, but in a sense that say, your Max Bench pressing 100lbs. And it takes you 5min to do 10 reps at 100lbs. Then you drop the weight to 50lbs, and now you can do 10 reps in 60 secs. That dosen't change the fact that you can only still bench at most 100lbs.
#42
PS....I now think we Officially have the LOUDEST! exhaust on these boards...
FIRST EVER ZPI full Cat-Back/S-Pipe Back Exhaust, Matched to a Blitz Nur Spec muffler.
This thing is Super loud! I would go as far to say that it's probably louder than some of you guys that are running a header w/exhaust.
We are stock header, ZPI Stainless S-pipe (2.5), ZPI Full exhaust (2.5), Blitz Nur Spec muffler.
FIRST EVER ZPI full Cat-Back/S-Pipe Back Exhaust, Matched to a Blitz Nur Spec muffler.
This thing is Super loud! I would go as far to say that it's probably louder than some of you guys that are running a header w/exhaust.
We are stock header, ZPI Stainless S-pipe (2.5), ZPI Full exhaust (2.5), Blitz Nur Spec muffler.
#43
Originally Posted by rhythmnsmoke
Originally Posted by scholarbb
Originally Posted by rhythmnsmoke
Originally Posted by scholarbb
Aluminum flywheel supposedly adds a lot of power too. Never used one yet. Should ship tomorrow. Only thing is install can get expensive.
Not trying to be a poop, but flywheels don't add power. Due to being lighter, it's less rotating mass, which in turn allows the engine to "deliver" better power.
Yeah, but in a sense that say, your Max Bench pressing 100lbs. And it takes you 5min to do 10 reps at 100lbs. Then you drop the weight to 50lbs, and now you can do 10 reps in 60 secs. That dosen't change the fact that you can only still bench at most 100lbs.
All the components of the engine serve a purpose. The intake for example does not directly add power its job is to bring in cool clean air. If you remove it entirely then you will make more power than you would with it in place. Right until you start taking dirt into your cylinders and scar the cylinder walls. Mufflers do not directly add power to the motor either they cancel noise and add restriction. Last time I checked NHRA top fuel dragsters(the 300+mph in the 1/4 ones) were not using mufflers either. So in answer to your argument YES the flywheel is a power adder just as much if not more than i/h/e.
#44
Originally Posted by rhythmnsmoke
PS....I now think we Officially have the LOUDEST! exhaust on these boards...
FIRST EVER ZPI full Cat-Back/S-Pipe Back Exhaust, Matched to a Blitz Nur Spec muffler.
This thing is Super loud! I would go as far to say that it's probably louder than some of you guys that are running a header w/exhaust.
We are stock header, ZPI Stainless S-pipe (2.5), ZPI Full exhaust (2.5), Blitz Nur Spec muffler.
FIRST EVER ZPI full Cat-Back/S-Pipe Back Exhaust, Matched to a Blitz Nur Spec muffler.
This thing is Super loud! I would go as far to say that it's probably louder than some of you guys that are running a header w/exhaust.
We are stock header, ZPI Stainless S-pipe (2.5), ZPI Full exhaust (2.5), Blitz Nur Spec muffler.
but is your deep too ? i dont consider mine raspy rice rocket more like a real super rocket. the magnaflow muffler they provide is huge.
#45
Originally Posted by tikbhoy
Originally Posted by rhythmnsmoke
PS....I now think we Officially have the LOUDEST! exhaust on these boards...
FIRST EVER ZPI full Cat-Back/S-Pipe Back Exhaust, Matched to a Blitz Nur Spec muffler.
This thing is Super loud! I would go as far to say that it's probably louder than some of you guys that are running a header w/exhaust.
We are stock header, ZPI Stainless S-pipe (2.5), ZPI Full exhaust (2.5), Blitz Nur Spec muffler.
FIRST EVER ZPI full Cat-Back/S-Pipe Back Exhaust, Matched to a Blitz Nur Spec muffler.
This thing is Super loud! I would go as far to say that it's probably louder than some of you guys that are running a header w/exhaust.
We are stock header, ZPI Stainless S-pipe (2.5), ZPI Full exhaust (2.5), Blitz Nur Spec muffler.
but is your deep too ? i dont consider mine raspy rice rocket more like a real super rocket. the magnaflow muffler they provide is huge.
#46
Originally Posted by scholarbb
Originally Posted by rhythmnsmoke
Originally Posted by scholarbb
Originally Posted by rhythmnsmoke
Originally Posted by scholarbb
Aluminum flywheel supposedly adds a lot of power too. Never used one yet. Should ship tomorrow. Only thing is install can get expensive.
Not trying to be a poop, but flywheels don't add power. Due to being lighter, it's less rotating mass, which in turn allows the engine to "deliver" better power.
Yeah, but in a sense that say, your Max Bench pressing 100lbs. And it takes you 5min to do 10 reps at 100lbs. Then you drop the weight to 50lbs, and now you can do 10 reps in 60 secs. That dosen't change the fact that you can only still bench at most 100lbs.
All the components of the engine serve a purpose. The intake for example does not directly add power its job is to bring in cool clean air. If you remove it entirely then you will make more power than you would with it in place. Right until you start taking dirt into your cylinders and scar the cylinder walls. Mufflers do not directly add power to the motor either they cancel noise and add restriction. Last time I checked NHRA top fuel dragsters(the 300+mph in the 1/4 ones) were not using mufflers either. So in answer to your argument YES the flywheel is a power adder just as much if not more than i/h/e.
If you don't agree, then just simple agree to disagree. I don't want to get into a back and forth over this....I'm sorta tired today...
#49
Originally Posted by rhythmnsmoke
Originally Posted by scholarbb
Originally Posted by rhythmnsmoke
Originally Posted by scholarbb
Originally Posted by rhythmnsmoke
Originally Posted by scholarbb
Aluminum flywheel supposedly adds a lot of power too. Never used one yet. Should ship tomorrow. Only thing is install can get expensive.
Not trying to be a poop, but flywheels don't add power. Due to being lighter, it's less rotating mass, which in turn allows the engine to "deliver" better power.
Yeah, but in a sense that say, your Max Bench pressing 100lbs. And it takes you 5min to do 10 reps at 100lbs. Then you drop the weight to 50lbs, and now you can do 10 reps in 60 secs. That dosen't change the fact that you can only still bench at most 100lbs.
All the components of the engine serve a purpose. The intake for example does not directly add power its job is to bring in cool clean air. If you remove it entirely then you will make more power than you would with it in place. Right until you start taking dirt into your cylinders and scar the cylinder walls. Mufflers do not directly add power to the motor either they cancel noise and add restriction. Last time I checked NHRA top fuel dragsters(the 300+mph in the 1/4 ones) were not using mufflers either. So in answer to your argument YES the flywheel is a power adder just as much if not more than i/h/e.
If you don't agree, then just simple agree to disagree. I don't want to get into a back and forth over this....I'm sorta tired today...
#50
^^Heeeheee...Anyhow, here is our setup. I don't think I have heard anything louder, or as loud as our setup.
For comparisons sake, this is what the first setup looked and sounded like. Notice in the vid how funktified the cocking of the exhaust is. Sounds a tad bit better the first time, but not as powerful as the second setup.
First Setup specs:
2.5 crushed bent pipe (shrunk to 2.0 at every bend)
Stock Header
Stock S-pipe
Piping stops at the 2nd Cat Converter
No resonator
Click here to watch Blitz-Cat-Back-Exhaust
Now, the new setup is a ZPI/Blitz combonation. Not all funktified, a perfect JDM lean. Louder, and a bit more raspy. When the turbo goes in, I will take another vid to see how the sound changes after the turbo. It should smooth out the sound some. If not, then I will add a small resonator.
New Setup Specs:
ZPI 2.5" Stainless S-Pipe
ZPI 2.5" Cat/S-pipe back exhaust
Blitz Nur Spec Muffler
No 2nd Cat
No resonator
Click here to watch ZPIBlitz-Combo
Took this second vid for fun..
Click here to watch Sound-Variance
My hats goes off to Kenny@ZPI, as he made this possible with his welding and fabrication skills.
For comparisons sake, this is what the first setup looked and sounded like. Notice in the vid how funktified the cocking of the exhaust is. Sounds a tad bit better the first time, but not as powerful as the second setup.
First Setup specs:
2.5 crushed bent pipe (shrunk to 2.0 at every bend)
Stock Header
Stock S-pipe
Piping stops at the 2nd Cat Converter
No resonator
Click here to watch Blitz-Cat-Back-Exhaust
Now, the new setup is a ZPI/Blitz combonation. Not all funktified, a perfect JDM lean. Louder, and a bit more raspy. When the turbo goes in, I will take another vid to see how the sound changes after the turbo. It should smooth out the sound some. If not, then I will add a small resonator.
New Setup Specs:
ZPI 2.5" Stainless S-Pipe
ZPI 2.5" Cat/S-pipe back exhaust
Blitz Nur Spec Muffler
No 2nd Cat
No resonator
Click here to watch ZPIBlitz-Combo
Took this second vid for fun..
Click here to watch Sound-Variance
My hats goes off to Kenny@ZPI, as he made this possible with his welding and fabrication skills.
#51
#52
Originally Posted by aacordon
Cool tone, but the thread is entitled "Loudest Exhaust"...
#53
Originally Posted by ZPIracing
Any full system with an S-pipe and a header will be very loud. All of the axle back systems are going to be quieter than a full system. The real noise is found in removing the header.
#57
Originally Posted by wushutc
lol thanks for the feedback fellaz, i appreciate the help. Yea I guess you can only go so loud if you wanna stay street legal and not flip up the air lol. Is the HKS exhaust loud or louder than the Megan??
#58
you decide
Megan...
http://youtube.com/watch?v=o3zoCMNBHik
HKS...
http://youtube.com/watch?v=l_HUJ12r-oQ
IMO, HKS sounds better and alot of people on here will vote for them.
Megan...
http://youtube.com/watch?v=o3zoCMNBHik
HKS...
http://youtube.com/watch?v=l_HUJ12r-oQ
IMO, HKS sounds better and alot of people on here will vote for them.
#59
Originally Posted by Yanki01
you decide
Megan...
http://youtube.com/watch?v=o3zoCMNBHik
HKS...
http://youtube.com/watch?v=l_HUJ12r-oQ
IMO, HKS sounds better and alot of people on here will vote for them.
Megan...
http://youtube.com/watch?v=o3zoCMNBHik
HKS...
http://youtube.com/watch?v=l_HUJ12r-oQ
IMO, HKS sounds better and alot of people on here will vote for them.