Scionarra

i have the injen axle back exhaust and it seems as if it is sitting flush against the bottom side of my rear bumper... thankfully it hasnt gotten hot enough to melt it but i recently bought a lip kit that will be sitting right above it and i know it will be sitting between the exhaust and the bumper... does anyone know of any solutions to this? i would like there to be at least some elbow room there... what should i do?

thanx for the help in advance!

aen

get under the car and mess around with those little rubber things, try to find a solution like that.

tCduck

I had the same problem with my HKS and all I did was use some coat hanger wire and move it around and use the hanger wire as hanger. And make sure you use pliers to bend and twist the ends. Worked for me.

TeeCizzle

Is a Rash developing from the Rubbing????....hahaha....

They have a CF piece that fits around the exhaust area of the rear bumper too!!

hashmanson76

well this is what i did it cost me 2 coke bottles lol i used 2 bottle caps i got under my car pulled the ehxaust down and shoved a bottle cap in one of little rubber hanger holes it was still rubbing so i got another one and shoved it inthe other hole it helped out alot no more burn mark on ur bumper lol ill take a pic with my cell phone right now

hashmanson76

lol here it is hope this pic explains it lol
i tryed doing it the right way i went to a local performance shop to get a longer rubber part but they didnt have any in the size i needed so i had to do somthing

TeeCizzle

^^ Thats SO ghetto!!!!...haha...if it works thats cool...They might slip-out after a while!!

Get different rubber hangers!!

Thank goodness I have no rubb'in probs w/ my DC Sport exhaust!...

hashmanson76

its been on thier for about a year allready no problems i didnt want to burn my bumper so i had to do it east los represent!!!lol

Scionarra

its never ghetto... its more like a "super custom mod" lol... thanks ill try a local shop and see what they can if not then ill do the bottle cap thing except ill try to use something more durable

GQQSE13

did any of tha twork? because i am having the problem except its starting to melt it.

hashmanson76

worked for me mang and it didnt melt any more so do the bottle cap mod lol

GQQSE13

i should list that one my mod list for shows haha.

so just put the bottle caps in that thing and it will keep it from touching?

hashmanson76

Yup it will drop the exhast a few and whaaalaaaaaa no more burnt bumper

07tctul

those caps have to add like 5 hp dude!haha

hashmanson76

no way man u actully losse HP since its a added wheight

Mr_Meaty

You got pics of the tip and the hangers?
I have the injen and it's not even close to rubbing.
And I dont' think a lip kit would lower the exhaust exit on the bumper. A full rear bumper might.

GQQSE13

5 hp? i thought it was 15 cuz i was gong to stack like 10 so that it hits the ground lol. i'll try it after work. because i've got the megan exhaust that is angled to it sits angled right at the corner of the bumper and just noticed the smell of it starting to melt and all i can say about it is.....cops don't like it!!!!!!!( meaning i almost got pulled over for the new exhaust last night )

hashmanson76

u mean of the tip right i allrady posted a pic of the hanger look up top

Mr_Meaty

not you...scionarra who is having the issue.
Here is a pic of mine. Dont' know if you can tell in this pic, bue there is half an inch to an inch between the tip and the bumper. No modding neccessary.

GQQSE13

actually i do, if you go on either cardomain and search for my tc under user "ChrisStdly23" or go to http://community.webshots.com/user/scotspitch568413 for pics of what my exhaust looks like with the set up