My scion tC "I/H/E" low quality PICS*& CLIPS*
#1
My scion tC "I/H/E" low quality PICS*& CLIPS*
(update)
wassup guys, just trying to throw yall my stuff for the tC..
Aftermarket parts:
-DC Header (it is half way wrapped; it was entirely wrapped but i took the bottom piece off to check if theres any damages on my header caused by the thermo wrap. but no damages)
-Weapon-R intake w/ WR Ram Air Kit ( air kit is semi-installed; its not attached to the filter but near it. i am not satisfied with that product so thats why i hooked it up that way) (Weapon-R intake is Thermo-Shield Wrapped; reflects heat away)
-Weapon-R Damper Kit
-Custom 2.25" midpipe w/ Resonator
-Tsudo Exhaust (i feel embarassed to say this)
-Resistor Chip
and here are the clips! they are short, poor quality but i think sound matters to most folks. This is a 3gp file, it must be played through either Windows Media Player or Real Player <--those 2 programs will update itself for the plug-ins... ENJOY!
at idle
http://home.comcast.net/~diluvium/MOV00002.3gp
Driving around (revving, racing)
http://home.comcast.net/~diluvium/MOV00003.3gp
wassup guys, just trying to throw yall my stuff for the tC..
Aftermarket parts:
-DC Header (it is half way wrapped; it was entirely wrapped but i took the bottom piece off to check if theres any damages on my header caused by the thermo wrap. but no damages)
-Weapon-R intake w/ WR Ram Air Kit ( air kit is semi-installed; its not attached to the filter but near it. i am not satisfied with that product so thats why i hooked it up that way) (Weapon-R intake is Thermo-Shield Wrapped; reflects heat away)
-Weapon-R Damper Kit
-Custom 2.25" midpipe w/ Resonator
-Tsudo Exhaust (i feel embarassed to say this)
-Resistor Chip
and here are the clips! they are short, poor quality but i think sound matters to most folks. This is a 3gp file, it must be played through either Windows Media Player or Real Player <--those 2 programs will update itself for the plug-ins... ENJOY!
at idle
http://home.comcast.net/~diluvium/MOV00002.3gp
Driving around (revving, racing)
http://home.comcast.net/~diluvium/MOV00003.3gp
#2
Senior Member
Scion Justice League of America
SL Member
Join Date: Apr 2005
Location: Portland, Oregon
Posts: 5,594
Sorry, way not a fan of the engine bay... it looks really cluttered... Our tC's are very clean in their design and I'm a stickler for keeping it that way inside and outside when it comes to modifications.... At least move the ground wires to follow piping or framework... For reference... here's my bay, and I've cleaned it up significantly since this pic as well, so what you see here has been touched up here and there too (Stickers removed, lettering off hoses removed)....
#5
Originally Posted by Diluvium
yup yup.. man, no remarks. does my car suck that bad?
#6
Who cares if your engine bay is pristine...unless you go to car shows, you're pretty much the only person who's going to see it.
So, from the other side of the fence, I say that if you're happy the way it is, leave it that way. Leave the showboating cosmetic obsessed people to their own.
So, from the other side of the fence, I say that if you're happy the way it is, leave it that way. Leave the showboating cosmetic obsessed people to their own.
#8
Senior Member
Scion Justice League of America
SL Member
Join Date: Apr 2005
Location: Portland, Oregon
Posts: 5,594
Coming from the Showboater...... ROFL.....
I don't think it's that bad.... Just could use some touchups to make it look sharp.... I'd be surprised if you didn't want it to look clean.... It's got some great performance mods and they would just go with a little different organizational setup...
I'm sure that you're not going to be the only one seeing it, as it'd be a shame.... Too much pretty stuff in there....
No hating.... Just constructive advice!
Keep it up...
I don't think it's that bad.... Just could use some touchups to make it look sharp.... I'd be surprised if you didn't want it to look clean.... It's got some great performance mods and they would just go with a little different organizational setup...
I'm sure that you're not going to be the only one seeing it, as it'd be a shame.... Too much pretty stuff in there....
No hating.... Just constructive advice!
Keep it up...
#9
Originally Posted by Mediocre_Generica
Who cares if your engine bay is pristine...unless you go to car shows, you're pretty much the only person who's going to see it.
So, from the other side of the fence, I say that if you're happy the way it is, leave it that way. Leave the showboating cosmetic obsessed people to their own.
So, from the other side of the fence, I say that if you're happy the way it is, leave it that way. Leave the showboating cosmetic obsessed people to their own.
#11
Originally Posted by B1uEsC1uEs
have you dyno'd it? im just wondering, whats the most hp that a tC can get off IHE?
i really dont care of the mess on the engine bay. i mean when you drive, people see it from the outside.
just to let you guys know, my ground wires are attached to the right side of the engine because the left side bolt vibrated off. idk why but the sealed thread on that bolt broke, so i got hole in there..
#14
Umm... those ground wires don't just drape down near the header like that, do they?
Definite finish issues, regardless. Just because something is functional doesn't mean it has to look slipshod. Even doorstops come in different designs and colors. Make it look like you gave it some effort.
Definite finish issues, regardless. Just because something is functional doesn't mean it has to look slipshod. Even doorstops come in different designs and colors. Make it look like you gave it some effort.
#19
Originally Posted by PghtC
gotta move that wire.
are you embarrased about the Tsudo exhaust or the eBay resistor mod? If I were you I would remove the resistor, but keep the exhaust.
are you embarrased about the Tsudo exhaust or the eBay resistor mod? If I were you I would remove the resistor, but keep the exhaust.
but i do enjoy that resistor mod tho, it pulls hard constantly.
i am thinkin about buying new headers tho with s-pipe and just thermo wrap all of it... oh, and id careless if the headers crack since ill still have my DC's. i got DC headers wrapped and still no problems...
Thread
Thread Starter
Forum
Replies
Last Post
xdejablu3x
Scion tC 1G Suspension & Handling
4
04-19-2017 03:44 PM
cid_mcdp
Maintenance & Car Care
4
01-05-2015 02:45 PM
TheTripleC
PPC: Vehicles
1
01-04-2015 06:46 PM
ScionLife Editor
Scion News Forum
1
12-06-2014 11:58 PM
ScionLife Editor
Scion iM Discussion Lounge
0
11-28-2014 11:10 PM