flipb0i

would you be able to swap the MAF sensor from an 06 tC to the 07 tC or will you need swap the whole intake?

soros151

Maybe, Wire diagram would be good on this. Try to see if they match. But maybe the 07 MAF is better than the 06.

rivas_203

iTrader: (1)

you probably wouldnt be able to because the differences most likely go all the way to the ECU

soros151

True, but do you have an 06 MAF laying around. Maybe compare the MAFs wires.

SquallLHeart

the wire configuration looks different from the glance that i saw.

soros151

That's why I said using a wire diagram, to see if all the wires are there, but just have different colors. I think not much has changed. Also, remember if u do this, and screw this off, no warranty for u.

rivas_203

iTrader: (1)

^^ true swapping would be definate voidage of your warranty. also to the OP, why would you want to switch MAF? aftermarket intake?

SquallLHeart

^^ that's my only guess.... but they make aftermarket intakes for the '07's already......

rivas_203

iTrader: (1)

^^ thats what i thought. maybe he came by one for an 05-06 for free?

flipb0i

yeah, i'm one of those newbies who bought an aftermarket intake but didn't realize because i didn't do my research that they changed the MAF sensor on the 07. so now, i'm stuck with an INJEN 05-06 CAI but i have the 07 tC.

Another question, you think it'll be safe for me to a welding place to have them make a new weld for the MAF sensor? you think it'll work or that's a big NONO!?

SquallLHeart

uhh.. i would return or sell the intake you have and buy the one they made for the '07..

don't do anything else..

flipb0i

yeah i was thinking that too but as a suggestion you think it'll work?

rivas_203

iTrader: (1)

if theyre concerned with your satisfaction, they should replace it.

flipb0i

yeah that would be true, but i did asked them and they said that there policy is 14 day return/exchange plus 25% restocking fee but since i am 2 days late, i wouldn't be able to send it back to them.

SquallLHeart

i wouldn't do it... but it might work..

flipb0i

lol...which would be better SWAPPING MAF SENSOR OR GETTING IT WELD for a new hole?

SquallLHeart

it's DON'T swap the MAF sensor..

and i would try selling the intake still..

Louie

just sell it on ebay for a small loss, and get a new 07 intake. 25% restocking fee is crazy, lol.

soros151

sell it. Best for everyone, and u'r car.

flipb0i

yeah i will sell it....i tried to drill a new hole in it in order to fit the MAF but the hole where the SENSOR goes in is actually to big...so note the MAF SENSOR is smaller than the previous models....thanks for all the advice