rhythmnsmoke

heehee...I just did this little mod. I think I will leave it like this till we get our exhaust re-done, this time with ZPI quality.

SquallLHeart

just installed one of the two turndowns that PrecisionMuffler had.... it's really, really loud..... it's to the point where i would consider it as "ricer" loud..... hmm.... well... it was the cheapest mod i've ever done (felt some gains to it).. hmm... i think i'm gonna leave it like that as well until I get an actual exhaust that isn't too loud.

silverstreak

oh jesus here we go

someguywithcar

i thought this thing makes u slower since u dont have that much back pressure

DoItBig

what springs? I really want to try this but have no idea how to do it
and do i really need to jack up the car becasue I dont have a carjack

Thanks

Mizle

its very simple to do....u dont NEED a jack but its very helpful. Spray to two bolts connecting the mid pipe and axle back sections with some wd40 let it sit for 10 minutes then go in there with a socket wrench and get em off. now from there unhook the hangers and take off the axle back. Now if u want to leave the axleback on what he was saying is take the bolts out and put the springs in between the seperated peices and there ya go.

DoItBig

alright thanks Ill give it a shot

Brakefade

Bah, how bout you just remove the whole exhaust thing and let the fumes come out from the engine. Remove your hood for best results.

Mizle

that could work haha. Its pretty interesting sounding runing and open down pipe

Skeletor

i think it sounds execellent,not too raspy.very deep sounding growl.But, when it rains,wouldnt it suck up the moisture and possibly blow the head,or suck up enough to do little damage??

iocca

ive had mine like this for about 5k miles. it squeeks at idle and some times just above idle. very annoying. but def. makes a difference.

io333

wish you'd make a vid from inside the car, windows closed, & a few full throttle runs through the gears!

SquallLHeart

if you're talking about running it open block.. give me a call when you break your engine. no one really try this please. open header is as far as i would go.. but even that's pushing it.