The01Cav

iTrader: (2)

Alright well I bought a S-pipe from a local tC owner, only issue is it didn't come with anything. All that I got was a S-pipe. I tried to install it tonight, but the donut off the stock manifold is too large and the stock s-pipe bolts are too short.

my06tc

iTrader: (2)

they usually dont come with anything,you should be able to use your stock hardware,dont understand how the donut is too big

The01Cav

iTrader: (2)

the stock bolts are too short and it just barely fits on the donut, it doesn't fit as well as the stock s-pipe does.

Frizz

It fits. Just gotta use that man power.

The01Cav

iTrader: (2)

the stock bolts wont go through the flange because of the area that bottoms out a seats on to the flange of the stock header.

my06tc

iTrader: (2)

post pics of the bolts if you can,the bolts that go from the header to the downpipe is different then the bolts that go from the downpipe to the midpipe,the stock header donut should fit righti n side of the piping

The01Cav

iTrader: (2)

I found out it's a old ZPI s-pipe and they couldn't use the stock bolts.

The01Cav

iTrader: (2)

S-pipe is on, I modded the bolts so that they would fit through the flange.

my06tc

iTrader: (2)

gotta do what you gotta do, so how do you like it,i know your not gonna feel a difference maybe a little louder exhasut tone

The01Cav

iTrader: (2)

Not bad, deff louder!