TSUDO 4-2-1 Header test fit pics (56K bad)
#29
Originally Posted by tCTaco
What is the innner Diameter of the S-Pipe???
https://www.scionlife.com/forums/viewtopic.php?t=177605
#30
Originally Posted by Sleep3r
i like it but i don't know about Tsudo......gotta wait for those dynos
Actually looks like it angles under the car better than the MMW - seems it doesn't hang down as much - which is good.
But ... any new I/H/E product demands a dyno ...
#31
Originally Posted by Mid_Life_tC-risis
Originally Posted by Sleep3r
i like it but i don't know about Tsudo......gotta wait for those dynos
But ... any new I/H/E product demands a dyno ...
#32
Originally Posted by Mid_Life_tC-risis
Originally Posted by Sleep3r
i like it but i don't know about Tsudo......gotta wait for those dynos
Actually looks like it angles under the car better than the MMW - seems it doesn't hang down as much - which is good.
But ... any new I/H/E product demands a dyno ...
but as far as the angles under the car thing, it could just be the angle they took the pix.... my friend has MMW version 2 header (1 piece header) and this tsudo looks EXACTLY like it.... down to the welds.
#36
Senior Member
Team ScionEyed
SL Member
iTrader: (1)
Join Date: Sep 2005
Location: Houston, TX
Posts: 3,703
Originally Posted by speedelement
Originally Posted by tCTaco
What is the innner Diameter of the S-Pipe???
https://www.scionlife.com/forums/viewtopic.php?t=177605
#37
Its not its 2.5 I thought you said you had BRAND #1 exhaust thats not a tsudo thats a nopi #1 exhaust.
i have the tsudo and measured it a few times,I have a insert thats has to fit INSIDE the exhaust mid pipe and the insert is made to USA specs 2.5 exterior, so i had to make sure it would fit INSIDE the tsudo pipe before i paid for the insert.
unless you got yours from a diff source but the speed-element tsudos are 2.5.
obviously this is exterior diameter, the interior is about 2.43##### but you are not going to lose 1/25 of an inch in wall thickness...
i have the tsudo and measured it a few times,I have a insert thats has to fit INSIDE the exhaust mid pipe and the insert is made to USA specs 2.5 exterior, so i had to make sure it would fit INSIDE the tsudo pipe before i paid for the insert.
unless you got yours from a diff source but the speed-element tsudos are 2.5.
obviously this is exterior diameter, the interior is about 2.43##### but you are not going to lose 1/25 of an inch in wall thickness...
#39
Senior Member
Team ScionEyed
SL Member
iTrader: (1)
Join Date: Sep 2005
Location: Houston, TX
Posts: 3,703
The Number One exhaust is the same thing as the Tsudo...I knew this when I got a Tsudo for my RS1 and sat them next to each other. I measured the ID of the Tsudo before I put it on and got the same thing...2.25ID...unless tha new Catbacks with the larger resinator changed???