|Dezod Motorsports| K1 connecting rods back in stock!
#6
Originally Posted by paul_dezod
Originally Posted by Joe_Dezod
H Beam.
The tune is important, because you can possibly squeeze almost 400hp with the stock rods alone provided the conditions are perfect.
#10
The should not require any notching.
The tune makes a BIG difference in what they can handle. I would say over 400whp is fine, but as you approach 500 or so things get pretty hairy. We had a customer car make some pretty extreme numbers on these rods.
The tune makes a BIG difference in what they can handle. I would say over 400whp is fine, but as you approach 500 or so things get pretty hairy. We had a customer car make some pretty extreme numbers on these rods.
#11
Originally Posted by Joe_Dezod
The should not require any notching.
The tune makes a BIG difference in what they can handle. I would say over 400whp is fine, but as you approach 500 or so things get pretty hairy. We had a customer car make some pretty extreme numbers on these rods.
The tune makes a BIG difference in what they can handle. I would say over 400whp is fine, but as you approach 500 or so things get pretty hairy. We had a customer car make some pretty extreme numbers on these rods.
We have had a few customers make high 400s and low 500s on these rods with no issues. So take that as a feather in your cap.
#12
since i'd have to take the engine out to put the rods in i'm going to be making a guide about building your engine. do both you and joe want to help me? i'm not quite versed in what i have to hone, machine or balance haha
#13
Originally Posted by aen
since i'd have to take the engine out to put the rods in i'm going to be making a guide about building your engine. do both you and joe want to help me? i'm not quite versed in what i have to hone, machine or balance haha
#14
complete threadjack
has the az dezod shop opened?
is there even one?
im not on SL enough and your site only says NY
ive uh, got a few things i want to do and vegas isnt exactly the most scion friendly place
has the az dezod shop opened?
is there even one?
im not on SL enough and your site only says NY
ive uh, got a few things i want to do and vegas isnt exactly the most scion friendly place
#15
Originally Posted by paul_dezod
Originally Posted by aen
since i'd have to take the engine out to put the rods in i'm going to be making a guide about building your engine. do both you and joe want to help me? i'm not quite versed in what i have to hone, machine or balance haha
matt, the dezod store is not open yet, as far as i know they WILL have a store but right now not yet.
if you come to az you can chill at my pad.
edit: perhaps i came off as a little egotistical i didn't mean that. i meant it along the way of...yes, i'm aware that a small mistake can turn into something big but it's a chance i'm going to take and this won't be until i can finish up school or at least get to the engine building portion of school.
besides, we all start somewhere
#16
Hopefully this are in stock once the white stuff hits the ground! Trust me paul you'll be seeing my tc this winter! Ull prob be sick of it!
Not only do i not drive my car in the winter. But through winter months i make about 5x my pay checks now
Not only do i not drive my car in the winter. But through winter months i make about 5x my pay checks now
#17
Originally Posted by aen
matt, the dezod store is not open yet, as far as i know they WILL have a store but right now not yet.
if you come to az you can chill at my pad
if you come to az you can chill at my pad
moderator? sl is lame haha