08_Scion_tC Build/Pic Thread
12-20-2009, 05:23 PM
#22
Senior Member
Fail, INC
SL Member
Join Date: May 2009
Location: York, PA
Posts: 4,043
Specs on the PTUNING SPEC-SS Turbo Kit (Full Kit):
Turbocharger:
Garret T3/04E 57 trim .82 A/R with v-band turbine outlet.
SS Braided oil feed line.
SS Braided oil return line.
Exhaust Components:
Full 304 SS equal length low-mount tubular manifold with a long, narrow angle merge collector (Same as the one on our Ptuning TA tC).
Tial 38mm v-band MVS Wastegate (new Tial design) (8.5 psi spring).
304SS external dump tube.
Full 304SS 3" v-band downpipe. The downpipe is designed to bolt directly to our Ptuning 3" exhaust system (either turbo-back or s-back).
Piping/Intercooler Components:
22"x8"x3.5" bar&plate Intercooler with 2.5" in/out w/cast end tanks.
2.75" 6061 aluminum upper intercooler piping w/beaded ends and blow-thru MAF housing.
2.5" 6061 aluminum upper intercooler piping w/beaded ends.
4" 6061 aluminum cold air intake.
Upper I/c piping will include a pre-welded bung for Water/Meth injection.
Tial 50mm v-band Q-BOV (new Tial design).
304SS T-bolt clamps for all connections.
4/5 ply silicone hose connectors.
I/C piping in either PTUNING Texture Red or PTUNING Texture Black.
AEM Dryflow 6" cone filter/ w/ 4" opening.
2 SPAL radiator fans.
Fueling:
AEM F/IC ECU.
PnP F/IC harness.
Professionally dyno-tuned base map.
DeatschWerks 550cc PnP Fuel Injectors.
Turbocharger:
Garret T3/04E 57 trim .82 A/R with v-band turbine outlet.
SS Braided oil feed line.
SS Braided oil return line.
Exhaust Components:
Full 304 SS equal length low-mount tubular manifold with a long, narrow angle merge collector (Same as the one on our Ptuning TA tC).
Tial 38mm v-band MVS Wastegate (new Tial design) (8.5 psi spring).
304SS external dump tube.
Full 304SS 3" v-band downpipe. The downpipe is designed to bolt directly to our Ptuning 3" exhaust system (either turbo-back or s-back).
Piping/Intercooler Components:
22"x8"x3.5" bar&plate Intercooler with 2.5" in/out w/cast end tanks.
2.75" 6061 aluminum upper intercooler piping w/beaded ends and blow-thru MAF housing.
2.5" 6061 aluminum upper intercooler piping w/beaded ends.
4" 6061 aluminum cold air intake.
Upper I/c piping will include a pre-welded bung for Water/Meth injection.
Tial 50mm v-band Q-BOV (new Tial design).
304SS T-bolt clamps for all connections.
4/5 ply silicone hose connectors.
I/C piping in either PTUNING Texture Red or PTUNING Texture Black.
AEM Dryflow 6" cone filter/ w/ 4" opening.
2 SPAL radiator fans.
Fueling:
AEM F/IC ECU.
PnP F/IC harness.
Professionally dyno-tuned base map.
DeatschWerks 550cc PnP Fuel Injectors.
