paul_dezod

The Dezod Motorsports Fuel Rail is designed to allow fueling to the engine beyond the capacity of the factory fuel rail. Our CNC 6061 Billet Aluminum Fuel Rail features a large -8 bore (.6875”) that can be used for any street or race application. The large internal bore acts like a reservoir with larger injectors keeping more fuel on tap, and works perfectly with stock sized injectors as well. The fuel rails are also anodized to a Type II MIL-A-8625 military spec, which makes this rail methanol and E85 compatible. This versatile rail is ideal for any application.

The Dezod Fuel Rail also includes OEM quality delrin fuel rail spacers, which no other 2AZ fuel rail manufacturer includes other than OEM Toyota. These high-temp plastic spacers help prevent heat transfer from the cylinder head to the fuel in the rail. Having less heat in the fuel rail itself is optimal for helping to prevent detonation and fuel vaporization, which is very important on any vehicle.




*No additional parts required for installation


*Manufactured and assembled in the USA


*Allows use of stock fuel pressure regulator


*Bossed O-ring fittings for a leak-less seal



* Military Spec Type II Anodizing (MIL-A-8625) makes the rail methanol &E85 compatible

bdis3

iTrader: (3)

Thanks for taking the time to talk to me on the phone Paul. Dezod customer service FTW!

paul_dezod

Twas my pleasure.

paul_dezod

To clarify, this can be used on an N/A app as well.

scion_andrew

iTrader: (2)

Is there any way to get the rail in the goldish color?

paul_dezod

Like the yellow we did for Dan G?

scion_andrew

iTrader: (2)

yes sir

paul_dezod

We are considering doing a Dan G edition, but nothing concrete yet. If you want it yellow, we can have it stripped and redone, but it would nearly double the cost of the rail for just one. Up to you.

scion_andrew

iTrader: (2)

hm ill wait till u come out with the Dan G edition, im sure u guys will!

gingles

iTrader: (1)

damn.....95 bucks....nice guys.

paul_dezod

I didn't know you did shirts! I like the wings and heart one.





Thanks Colby.

gingles

iTrader: (1)

haha....well pm me an addy and size and ill hook ya up with one.

deathbyc4

i know at the moment these are just the rail but will this come with return fittings to smaller AN fittings in the near future?

O5_TRD_tC

beautiful!

johnhawkins

iTrader: (1)

you said -8 AN....I want to put a push barb style fitting for the return - what is the thread on the rail itself? Is the return on the end of the rail or in the middle?

Ace83

iTrader: (6)

^^ it should be a -8 AN fitting lol, but why go with a barb when you can use a AN fitting on your fuel line that directly bolts on, no worries of having a clamp blow off

t_urbo_C_harged

very nice price guys!

paul_dezod

Our complete return kit should be out sometime next week.

ElevationTC

The ptuning rail use's oem spacers too!

johnhawkins

iTrader: (1)

I just like/want barb fitting - So I could use a -8AN thread to Barb fitting?