The 500whp Build (hopefully!)
#61
Originally Posted by TCFROEZEL
Originally Posted by davedavetC
if you aint seein the 2.4 L spoolin the GT40 your eyes must be closed.
send me video.
i'd be glad to take a look.
spool eficiently i doubth about it.
maybe spoolin it at 6000 RPM is not eficiently spoolin for me.an the rev cut out at 7000 RPM.
kthxbyetroll
#62
I know you have mentioned all the things you are planning for your TC in order to make 500 whp, obviously some people may not think that a GT4088r may be the best choice in this case including my self because of the size, lag, and so on. Understand that you are not reinventing the wheel, 500whp has been accomplished before with smaller turbos and that is the point they are trying to explain. Never the less you can put any turbo you want.. Some of us are just trying to help. In my opinion 4” downpipe, a GT4088r, Dual 44m waste gates are a bit overkill for 500hp. Who know, you may be ending with 600+hp or a blown motor wish we do not want to see…
Good lock in your project and I will be looking to see how this turned out..
Rick C.
Good lock in your project and I will be looking to see how this turned out..
Rick C.
#63
yeah tc motor should spin this turbo, heck it spins it at idle.. true you see even bigger turbos on smaller honda motors and yeah they spin and give massive numbers.. tc has revs low, but that's stock.. remember he is building the motor.. a well built motor with a good engine/fuel management will make success
#65
yeah sure as i've mentioned even a gt3076r can reach that goal, but then the turbo will be maxed out or close, gt35 will be a good option too.. but we dont know 500 is his goal for now and might decide to go bigger along the way.. so why not gt40?
#66
TOdd those honda's have lot's of revs,
and they have cams 4 sure.
we don't have that much rev on the motor.
i am not rryin bash on anyone in this thread, but eficiently spoolin the GT40 and still be Street .i have big doubths.
and they have cams 4 sure.
we don't have that much rev on the motor.
i am not rryin bash on anyone in this thread, but eficiently spoolin the GT40 and still be Street .i have big doubths.
He just just posted a few things about the project...Its going to be an evolution over time..
He will and most definately rev higher than the factory rev limit, especially when its time to take full advantage of the setup
Which means, he will have vavletrain, he will have cams, he will have an intake manifold etc.
There are steps to this process...
Instead of everyone here going after just one part of what he wrote, take a second to think about it before they type or doubt what ones goals are.
Instead why don't you just sit back and watch as the project unfolds.
It will take more guys like Reaper to step up for this community to evolve..so give him credit for wanting to try instead of doubting his plans.
know you have mentioned all the things you are planning for your TC in order to make 500 whp, obviously some people may not think that a GT4088r may be the best choice in this case including my self because of the size, lag, and so on. Understand that you are not reinventing the wheel, 500whp has been accomplished before with smaller turbos and that is the point they are trying to explain. Never the less you can put any turbo you want.. Some of us are just trying to help. In my opinion 4” downpipe, a GT4088r, Dual 44m waste gates are a bit overkill for 500hp. Who know, you may be ending with 600+hp or a blown motor wish we do not want to see…
We have much higher goals than 500whp. But just because that was not initial mentioned......There is a reason for the parts that are selected.
Regards-
Todd
#67
yeah lets be open minded, big mind = big success..
i remembered long time ago when someone was planning on the gt35 on the tc and quite a few were hating but then it was a success
i remembered long time ago when someone was planning on the gt35 on the tc and quite a few were hating but then it was a success
#69
Originally Posted by Ace83
yeah lets be open minded, big mind = big success..
i remembered long time ago when someone was planning on the gt35 on the tc and quite a few were hating but then it was a success
i remembered long time ago when someone was planning on the gt35 on the tc and quite a few were hating but then it was a success
Todd
Take it easy my friend. We are just writing our opinion about the 500whp. You have to admit that seems to much for 500 when you read his post. It's obvious that your goals are higher but 500 was what he said. As I said before. Good luck with that +750whp Tc!!!!! I wish I could learn and apply something to my project!!!!
#70
Todd
Take it easy my friend. We are just writing our opinion about the 500whp. You have to admit that seems to much for 500 when you read his post. It's obvious that your goals are higher but 500 was what he said. As I said before. Good luck with that +750whp Tc!!!!! I wish I could learn and apply something to my project!!!!
Take it easy my friend. We are just writing our opinion about the 500whp. You have to admit that seems to much for 500 when you read his post. It's obvious that your goals are higher but 500 was what he said. As I said before. Good luck with that +750whp Tc!!!!! I wish I could learn and apply something to my project!!!!
I did not mean too if I did.
Hopefully we all learn and benefit from projects like this
Regards-
Todd
#71
[quote="TurboToyotas"]
Todd, apology accepted, no need to, we are all learning and trying different thing everyday and finding out what works and what doesn’t.
It just that the title said 500whp Build (hopefully!) and with all the parts you guys mention (hopefully!) is not ever a question..
Good lock with it and please keep us posted.
Rick C.
first and foremost, to all.... please accept my apology if I came of with a "tone"
I did not mean too if I did.
Hopefully we all learn and benefit from projects like this
I did not mean too if I did.
Hopefully we all learn and benefit from projects like this
It just that the title said 500whp Build (hopefully!) and with all the parts you guys mention (hopefully!) is not ever a question..
Good lock with it and please keep us posted.
Rick C.
#72
Originally Posted by Ace83
yeah lets be open minded, big mind = big success..
i remembered long time ago when someone was planning on the gt35 on the tc and quite a few were hating but then it was a success
i remembered long time ago when someone was planning on the gt35 on the tc and quite a few were hating but then it was a success
I think those that have witnessed the GT35R hit full boost know the GT4088 will be OK!! It is obvious someone with a GT4088 on a daily driver 4 cylinder engine is going to be raising the rev limit and with a higher rev limit then there is no problem at all.
Pito
#73
good start... some parts might not be to my taste but granted would be interesting enough to see how it unfolds...
BTW u can rev to 7500 rpms on the right valve train.. i know this for a fact hehehe.... 7800 will be confirmed shortly...
BTW u can rev to 7500 rpms on the right valve train.. i know this for a fact hehehe.... 7800 will be confirmed shortly...
#74
Seems like Todd took the words right out of my mouth. I feel it will be very beneficial to me to as he stated let this project "evolve" as I build it. I want to take care of the built motor before this project ever sees boost so I wont have any worries there. Then, id like to tune it VERY conservative around 500whp give or take. Then from there we can turn up the wic accordingly. And thanks to everyone who is backing me and wishing me luck!
#75
Originally Posted by TurboToyotas
TT has the 3" exhaust out now??? Pics???
Plus there are 2 different style....but more on that later.
Regards-
Todd
Stephen
#76
Originally Posted by TCpete
good start... some parts might not be to my taste but granted would be interesting enough to see how it unfolds...
BTW u can rev to 7500 rpms on the right valve train.. i know this for a fact hehehe.... 7800 will be confirmed shortly...
BTW u can rev to 7500 rpms on the right valve train.. i know this for a fact hehehe.... 7800 will be confirmed shortly...
#79
I sent Todd a pm about 2 weeks ago now asking for a total price on everything im going to need (and I mean everything minus the built block) but he hasnt sent me a price on the whole shabang shipped.
#80
sent Todd a pm about 2 weeks ago now asking for a total price on everything im going to need (and I mean everything minus the built block) but he hasnt sent me a price on the whole shabang shipped.
I did not get an error message when I sent it the first time.
Do you have adobe?
Regards-
Todd