61mm tc versus 2004 R1
09-11-2009, 11:29 PM
#42
Senior Member
SL Member
Join Date: Feb 2006
Posts: 813
Meth? Race gas? Or e85? On that kinda of boost and whats the back side of the 67mm u have. I also just got comps new 64mm tbb turbo gonna see what it can do very soon but im runnin todds 2.1manifold hope that doesnt hold me back. What clutch u been rockin too
09-12-2009, 04:14 AM
#45
Senior Member
Music City Scions
Scikotics
SL Member
Join Date: Jun 2005
Location: TN
Posts: 16,747
thats cool. i remember yesterday there was a little verbal back and fourth between paul and a veteran member of these boards. it was something to do with paul not having proof of any customer cars with his kit making 400 or more to the wheels. vids and dynos would really help the man out.
:Stands up and raises hand:....that would be "I"....ehhee. And I see the scrimmage of words actually came to some good. Although appeared negative, We got a thread of a tC racing a crotch rocket out of it.. I know personally when I see Youtube comments from other people about how crappy the tC is, it drives me to make the tC better, and go harder. Perhaps that's the effect caused when I had that little back and forth with Paul. Helps the community in the end.
Maybe it's coincidental, maybe not so much...but would I be correct tofast4u to say an impromptu message was sent for you to make a thread of your beast due to my demand of proof? If not then that's pretty coincidental, but much respect for the beast you have built. Definitely looking forward to seeing images/vid.
PS...Be careful out there though man.
09-12-2009, 05:18 AM
#46
Senior Member
Music City Scions
Scikotics
SL Member
Join Date: Jun 2005
Location: TN
Posts: 16,747
All I was doing was just poking around Youtube and What do you know...
http://www.youtube.com/watch?v=54bjp...eature=related
Brings back memories of my fiance driving the tC after freshly turboed and me driving the 350z and us racing each other.
http://www.youtube.com/watch?v=54bjp...eature=related
Brings back memories of my fiance driving the tC after freshly turboed and me driving the 350z and us racing each other.
09-12-2009, 10:08 AM
#49
Senior Member
SL Member
Thread Starter
Join Date: May 2008
Posts: 199
Thats my GF's TC that raced the bike. It was only running 18-19 psi here though and soft on timing, on the stock returnless fuel system. I have since installed the return, Much more timing, and about 10 more psi of greatness..lol..
The C6 ZO6's are high 10 sec cars with drag radials, expecially with longtubes, intake, and a tune like mine has. the TC wouldnt be able to hang at the HP level it was running above from a stop, but the roll was a decent run.
P.S. I just got in, from installing the new Comp Tripple Ball Bearing 67mm turbo, and water lines.
will have dyno #'s sunday night
09-12-2009, 10:34 AM
#51
Senior Member
SL Member
Thread Starter
Join Date: May 2008
Posts: 199
I myself have a 93 TT hardtop STOCK twin turbo supra with 19k miles.19" HRE's, 93 TT hardtop(seen in 68mm video of supra) single 72mm turbo with 25k miles on it and 18" fikse's(very nice car, my favorite driver), and a 98 targa TT supra with a single GT47-88 with 10k origional miles and 18" Fikse's, 2009 ZO6, 2001 srunner my dad left me(It was similar to mine) 94 corolla(DD) 07 Scion XB(turd) lol
MY GF has the turbo TC, but has been driving my corolla everyday since I have been getting her car super reliable.
09-12-2009, 03:13 PM
#54
Senior Member
SL Member
Thread Starter
Join Date: May 2008
Posts: 199
That was at the supra meet a few years ago when I was first inquiring about buying the car from him, Peter Blach is one of my freinds, He actually shifted easy in that vid to not take any chances as you can hear, If I was driving, that bike would have been stretched even worse.
Im sure alot of you have heard of Peter Blach, hes one of the bigger names in the supra community
What is your whp goal for sunday's dyno session?
09-13-2009, 12:10 AM
#57
Senior Member
SL Member
Thread Starter
Join Date: May 2008
Posts: 199
My new triple ball bearing turbo is making a noise like the bearing cartridge has something wrong!!! I have had this damn manifold off the car over 10 times for silly stuff. LOL. Here we go again back to the 61 so I can at least get some #'s. I'm ____ed tho.
09-13-2009, 02:03 AM
#58
Senior Member
Music City Scions
Scikotics
SL Member
Join Date: Jun 2005
Location: TN
Posts: 16,747
Obviously you have removed the speed cut on the tC. Have you increased the RPM's on it? What have you set Redline to?
Besides turbo changes, what other issues have you experienced over time running at these power levels?
Besides turbo changes, what other issues have you experienced over time running at these power levels?
09-13-2009, 07:19 AM
#60
Senior Member
SL Member
Thread Starter
Join Date: May 2008
Posts: 199
standalone takes care of that. 8200 rpm nothing too serious! At all has went wrong