sebbyxtc

iTrader: (7)

How do you adjust the pedal exactly?

Syldrin

iTrader: (1)

there is an arm attached to the clutch pedal assembly just back it out some then tighten the nut down.

my06tc

iTrader: (2)

theres a rod behind the clutch,use a 12mm wrench to crack the nut loose,then with two fingers,very tight spot and pita....just turn the rod clockwise to bring the pedal higher,like 3-4 full turns depending on where you want the clutch to engage...then just lock the nut,but make sure you hold the rod while tightening the nut,if not,the rod will turn with it and you just wasted your time turning it,which you dont want..