crush02342002

iTrader: (2)

id hook ya up kev...if your ever in H-town you gata stop by and hang out

CarbonXe

iTrader: (1)

I say it fits, but something else won't because of it.

all4degame

I'm with carbon on this one. haha. I'm pretty sure the s pipe will have to be modified regardless.

CarbonXe

iTrader: (1)

This is where a donut gasket would come in handy. I have one between my downpipe and S-Pipe, and it gave me flexibility with the position of the S-Pipe.

all4degame

can't donut gasket a 3" vband to vband connection homes. lol

all4degame

Walking to class today, I got sneezed on.... I got all excited and looked to my left and saw a PT cruiser pulling out of the parking garage. Uhh.. those things are turbo charged? lol

nebster

yes they have turbo pt's. which is ___

thendawg

iTrader: (2)

this is where a mig welder and plasma cutter or cet rig comes in handy seriously thats when i bought my equipment - prolly 4-5 yrs ago i was gunna have to take a simple piece to a shop to have welded and they wanted to charge me like $50 just to weld it so i said hey i shud just learn to mig weld - bought a cheapo flux core from harbor freight and practiced lol now 4 years later im a pretty damn decent welder (also thanks to some pros who have helped with my technique lol) and i now have a millermatic 135 I still haev the harbor freight flux wire tho lol

crush02342002

iTrader: (2)

the 90amp huh... so do i , ima go for a mig soon and hopefully add a tig later on....i soooooo want to learn tig....I hear its the hardest to master...i like a good challange

CarbonXe

iTrader: (1)

Didn't know Todd changed to V-Bands. Guess he's trying to keep up with PTuning.

Syldrin

iTrader: (1)

todd has always run V-Bands on his 3inch set ups.

thendawg

iTrader: (2)

id love to learn to tig! i installed a 240v single phase outlet for my millermatic so ive got the power Im thinking of picking up the $260 tig from harbor frieght and attempt to learn haha And yea i had - well still ahev - the 90 amp flux from harbor freight lol

scikotictc232

I am not sure bout the harbor freight welders, I have the 90 amp also and with out gas it splatters like a ****. I dont trust it at all, I did use it to weld the tabs on my bumper so that my intercooler bolts in and its easier to take on and off. Tig welding is not that hard if you know how to weld. If you have ever played with arc or oxy acetylene. its all in watching the puddles. I am learning right now how to tig weld and I love it so much more. I am planning on buying the SNAP on Tig welder when I go off to wyo tech because of the 50 percent off. so i get it for about 3700.

aen

better get it during school cuz that deal doesn't apply after you graduate

crush02342002

iTrader: (2)

as far as i know all flux core machines splatter bad...thats why i want to go to a mig soon less splatter and cleaner welds.

I saw the harbor freight tig machine last weekend....i was pretty tempted just to try it out but i want that mig first just because im a little more familiar with a wire feed welder.

thendawg

iTrader: (2)

yea flux core splatters like HELL - thats why i bought a mig as soon as i could - i think miller has a decent tig for like $1300-1500 - i might look into it once the car is boosted again in a couple weeks and that expense is out of the way lol

crush02342002

iTrader: (2)

i hear that

scikotictc232

ya they splatter cause there is no gas. Mine sucks it dont penetrate to save itself. tig is fun man you would like it.

all4degame

someone teach me how to welddddd

crush02342002

iTrader: (2)

come over