ANTI FOULER-TURBO
10-23-2006, 08:53 PM
#1
Senior Member
SL Member
Thread Starter
Join Date: Jun 2006
Posts: 302
ANTI FOULER-TURBO
With my turbo kit i dont have a cat, but i do have the anti fouler mod is there a different antifouler out there i know there is a longer one i have the shorter one or somthing that u guys have used that is proven to take that cell off as i had the code read and it said it was the catlytic converter.
10-24-2006, 05:07 AM
#3
Senior Member
SL Member
Thread Starter
Join Date: Jun 2006
Posts: 302
10-24-2006, 05:10 AM
#4
There is an antifouler DIY here on the boards. I've already assembled one for myself. It consists of buying two HELP! brand spark plug non-foulers. Boring 1 our with a 1/2" bit, then threading together, with bored foulder on bottom for secondary O2 sensor, then threading into the s-pipe. I'll search for the page i saw it on real quick....
10-24-2006, 05:11 AM
#5
Originally Posted by Byta27
its the one from www.racingsolution.com
??
10-24-2006, 05:12 AM
#6
Senior Member
SL Member
Thread Starter
Join Date: Jun 2006
Posts: 302
thats exactly what i have now zero told me to get this one http://www.monstermotorworks.com/cgi...&ppinc=search2
10-24-2006, 05:31 AM
#8
Here's the antifouler DIY. Its near the bottom of the write up. You'll see it:
https://www.scionlife.com/forums/vie...=56520&start=0
https://www.scionlife.com/forums/vie...=56520&start=0
10-24-2006, 05:38 AM
#9
Senior Member
SL Member
Thread Starter
Join Date: Jun 2006
Posts: 302
yes i have the same one on there when i had headers it worked fine but with the turbo now it does not work and it is on the spipe i have the exact same antifouler i was just thining that maybe this one mught be better cause its longer http://www.monstermotorworks.com/cgi...&ppinc=search2
10-24-2006, 05:44 AM
#10
Originally Posted by Byta27
no i do not have the simulator i have the extender thing the 2 things that screw together to extend the o2 sensor out
10-24-2006, 05:45 AM
#11
Originally Posted by Byta27
yes i have the same one on there when i had headers it worked fine but with the turbo now it does not work and it is on the spipe i have the exact same antifouler i was just thining that maybe this one mught be better cause its longer http://www.monstermotorworks.com/cgi...&ppinc=search2
10-24-2006, 09:03 PM
#17
Originally Posted by Prototype_xB
Hmm. I would try adding 1 more spark plug non-fouler to the group and just see what happened.
Originally Posted by DK01
What about just adding more of the HELP brand adaptors to make the one you have longer? Same concept basically.
10-24-2006, 10:30 PM
#19
Turbonetics has an O2 extention in their kit that is 3.5" long. I just took some measurements of the DIY HELP! Brand antifouler i have and if you add 1 more non fouler to the 2, the overall is 3.6"
02-13-2007, 10:52 PM
#20
Senior Member
1UP Crew
SL Member
Join Date: Jan 2006
Location: Medly, FL
Posts: 3,510
Good thing i did a search before posting my question... I had the 2 antifouler set up with my headers before I went boost. My question is, since I have the emanage, should i still be using the antifouler setup? wouldnt that give the ecu a false reading when it comes to a/f ratios? <--- probably a newb question