mike6789k

Just talked to greddy, they said they havent even started testing on the 07 tC... sorry guys!

Just thought i'd let everyone know. So far dezod is the only company to have a kit for the '07's!

zer0

To bad you dont live near me, I bet you I could get it to work. With a few Dezod Components... :D

CRAracer05

I talked to zpi and they said theres should be out real soon.

zer0

The only thing different about the Greddy 07 kit would be the MAF adapter pipe. Which is simple to make if you have a flange. Then buy the Dezod PnP 07 harness and plug your emanage and go. Seriously its easy.

mike6789k

well... lets think WHY it wont work... the MAF is smaller than the old MAF and the ECU is a little different (i know there are more things, but that wont make it not work)... the ECU difference is probably negligable and we can simply wire up the emanage properly or even use the dezod harness (which i think isnt really needed as long as you know how to solder or tap into wires)...

so, as far as the MAF goes, cant we just order a MAF for the 05's and 06's and rewire that where our MAF is and slap that in the intake pipe?

mike6789k

yea hmmm... this is interesting... has anyone tried this yet?

hehe, if dezod sends me a free 06 kit ill be happy to try

rhythmnsmoke

Not exactly. There is a guy that bought a ZPI kit for his 07 already. I think he was planning on customizing it to fit the 07. But ZPI is working on a production version as well.

mike6789k

yea but by the time we recieve the zpi kit, greddy will have released the '09 kits...

zer0

Here is the Greddy "MAF PIPE"


Think about it, 07s already have an Intake out, its 2.5" tubing around the maf sensor area. Copy that design or buy a cheap ebay 07 intake(when available) and cut the maf senser flange and make a custom Greddy "MAF PIPE".

Dezod 07 PnP harness to run the emanage and your good to go. Those are the only things I forsee you needing. Everything else is the same as the 06.

mike6789k

is the ecu software any different than the 06?

if it's this simple i dont see why more people arent doing it!!

zer0

Cause nobody with an 07 has money to try things out. Im willing to bet it works.

mike6789k

i dunno if im willing to bet money on it though... whats the return policy for dezod and or greddy?

zer0

Im speaking just on the Greddy kit, Dezod has their own designed kit. An 07 would just need their PnP harness. The Greddy you can get cheap from TPD ($2404Shipped), and sell it on ebay for the same price, you would be the cheapest price on eBay, somebody would buy it.

mike6789k

hmm... so i can get greddy at my door for $2404? ____... thats amazing...

so what about my idea about taking the 06 maf and wiring it up to where my 07 one is right now... id prefer this over playing with the piping...

zer0

Doubtfull that will work, the 07 ECU expects a reading from an 07maf.

tc2nut4

not sureyou wanna mess around with your MAF piece
BAAAAADDDD things could happen

tc2nut4

Brian... YOu always beat me to it

P.S. I think I just saw your kaminari friend leaving work and he was about to get on 30

P.S.S. sorry for the threadjack

zer0

Yea, I would just get an 07 flange and make the maf pipe. That will be cheaper then destroying MAF sensors. $$$$$$$$$$$$$$$$

tc2nut4

Worst case you could get the injen intake since they make one for the 07... It's a little price but hey even after you buy the Injen intake its still the cheapest stage 1 setup out there

rhythmnsmoke

When you are constantly selling kits, that are manufactured locally, it's hard to keep them in stock. Also, the shipping times have improved.