calling all TREADSTONE owners**
#1
calling all TREADSTONE owners**
what's up guys, i plan on getting the treadstone kit pretty soon but i have a few questions first. i was wondering what you guys who have the kit already are modded with besides the turbo. i'm building a list of things i'm going to need to aid in the boost. did you guys opt for a piggyback system or did you just use the tuning system it came with? did you change your clutch? what gauges are you running? just general stuff like that. i only plan on running around 9 psi. i'd like to not run a piggyback if i don't have to. but i want your feed back on the kit and performance and what mods you would recomend to add. thanks in advance
#3
Hey bro,
I'm running the Treadstone set up. Get the Emanage and the Dezod PnP harness for safety's sake. At 9psi, I would without a doubt run a piggy back set up. Get the AEM Wideband 02 gauge for monitoring AFR's. Get a descent boost gauge, I opted for the Defi Blue Racer Boost gauge. I'd say upgrade yoru clutch from the get go cause at 9 psi, you'll be around 280whp i'd imagine. And for a place to do installs, call STi Motorsports and ask for Robby. Tell him Jared sent you. They don't have a dyno, but they do good work.
I'm running the Treadstone set up. Get the Emanage and the Dezod PnP harness for safety's sake. At 9psi, I would without a doubt run a piggy back set up. Get the AEM Wideband 02 gauge for monitoring AFR's. Get a descent boost gauge, I opted for the Defi Blue Racer Boost gauge. I'd say upgrade yoru clutch from the get go cause at 9 psi, you'll be around 280whp i'd imagine. And for a place to do installs, call STi Motorsports and ask for Robby. Tell him Jared sent you. They don't have a dyno, but they do good work.
#4
this is the list i was thinking of going with:
1. e-manage blue
2. dezod plug'n'play harness
3. ingalls etd
4. greddy front and back strut bars
5. fidanza lightened flywheel
6. clutchmasters stage 2 clutch
7. gauges- boost, e.g.t , air/fuel , oil press , AEM wideband
8. ATI tripple gauge pod
9. carbon trix carbon fiber dual gauge pod for a -pillar
would there be anything else i might need? also what is the number to that shop?
i see you live in l.a. what area maybe if you live close i could check out your setup.
1. e-manage blue
2. dezod plug'n'play harness
3. ingalls etd
4. greddy front and back strut bars
5. fidanza lightened flywheel
6. clutchmasters stage 2 clutch
7. gauges- boost, e.g.t , air/fuel , oil press , AEM wideband
8. ATI tripple gauge pod
9. carbon trix carbon fiber dual gauge pod for a -pillar
would there be anything else i might need? also what is the number to that shop?
i see you live in l.a. what area maybe if you live close i could check out your setup.
#6
i don't have aim. but shoot over your info to my e-mail sadistictc@yahoo.com. whats the number for that shop?
#8
Senior Member
Team No Limitz
SL Member
Team ScioNRG
Join Date: May 2004
Location: Smithtown Scion (NY)
Posts: 3,789
id get the clutchmasters stage 3 or 4 kevlar cause once you start crankin up the boost its not gonna hold those tq levels for long especially if it gets glazed the slightest bit then your stuck doing what travis(rythmnsmoke) had to do...changing out your clutch 4 times lol
#9
for an install place check out the place in my sig...it's in baldwin park just outside of LA...tell them Ty sent you and you might get an even better deal...sorry no dyno though
#11
that's alotta gauges..and just so you know, the AEM wideband is the a/f gauge.
and the carbon trix a-pillar's look awesome! i wanna get them too but still saving up. other expenses keep coming up lol
and the carbon trix a-pillar's look awesome! i wanna get them too but still saving up. other expenses keep coming up lol
Thread
Thread Starter
Forum
Replies
Last Post
Sgtfluffy16
Regional - Northeast
3
07-28-2021 10:32 PM
BlingSlade
Scion iA Discussion Lounge
6
10-19-2016 12:39 AM
Pack34
Scion tC 1G ICE & Interior
0
09-27-2015 07:11 PM