Can i hit 450+/-??
#1
Can i hit 450+/-??
Hey all... im looking for specific info that i havent found searching on the site. bits and pieces here and there, but nothing that really answers my question.
Can I hit 450whp give or take? and if not, what would you guys suggest i change/upgrade? I may have forgotten to add something to the list, so if you guys think im missing something, or need more info, lmk.
Fuel/Fuel Management
return style fuel system:
Aem fuel rail
return lines
walbro fuel pump
750cc rc injectors
Dezod AEM racebox
Head
BC Turbo Cams
BC Valve Train
Ferrea Valves (Std size)
Street Port and Polish
Three Angle Valve job
Block
Cp Pistons 9.0-1 .5 overbore
BC Rods
Knife Edged Crank
Balance Shaft Delete
Turbo
Greddy Kit with 18g Turbine... Upgraded internal wastegate
(thinking about changing to the 20g to keep the rest of the piping for the IC)
Misc stuff you guys might want to know:
Greddy Profic B boost controller
Fidanza 12lb Flywheel
NST CR Lite Crank Pulley
If you guys need more info please feel free to ask.
Can I hit 450whp give or take? and if not, what would you guys suggest i change/upgrade? I may have forgotten to add something to the list, so if you guys think im missing something, or need more info, lmk.
Fuel/Fuel Management
return style fuel system:
Aem fuel rail
return lines
walbro fuel pump
750cc rc injectors
Dezod AEM racebox
Head
BC Turbo Cams
BC Valve Train
Ferrea Valves (Std size)
Street Port and Polish
Three Angle Valve job
Block
Cp Pistons 9.0-1 .5 overbore
BC Rods
Knife Edged Crank
Balance Shaft Delete
Turbo
Greddy Kit with 18g Turbine... Upgraded internal wastegate
(thinking about changing to the 20g to keep the rest of the piping for the IC)
Misc stuff you guys might want to know:
Greddy Profic B boost controller
Fidanza 12lb Flywheel
NST CR Lite Crank Pulley
If you guys need more info please feel free to ask.
#9
Hey all... im looking for specific info that i havent found searching on the site. bits and pieces here and there, but nothing that really answers my question.
Can I hit 450whp give or take? and if not, what would you guys suggest i change/upgrade? I may have forgotten to add something to the list, so if you guys think im missing something, or need more info, lmk.
Fuel/Fuel Management
return style fuel system:
Aem fuel rail
return lines
walbro fuel pump
750cc rc injectors
Dezod AEM racebox
Head
BC Turbo Cams
BC Valve Train
Ferrea Valves (Std size)
Street Port and Polish
Three Angle Valve job
Block
Cp Pistons 9.0-1 .5 overbore
BC Rods
Knife Edged Crank
Balance Shaft Delete
Turbo
Greddy Kit with 18g Turbine... Upgraded internal wastegate
(thinking about changing to the 20g to keep the rest of the piping for the IC)
Misc stuff you guys might want to know:
Greddy Profic B boost controller
Fidanza 12lb Flywheel
NST CR Lite Crank Pulley
If you guys need more info please feel free to ask.
Can I hit 450whp give or take? and if not, what would you guys suggest i change/upgrade? I may have forgotten to add something to the list, so if you guys think im missing something, or need more info, lmk.
Fuel/Fuel Management
return style fuel system:
Aem fuel rail
return lines
walbro fuel pump
750cc rc injectors
Dezod AEM racebox
Head
BC Turbo Cams
BC Valve Train
Ferrea Valves (Std size)
Street Port and Polish
Three Angle Valve job
Block
Cp Pistons 9.0-1 .5 overbore
BC Rods
Knife Edged Crank
Balance Shaft Delete
Turbo
Greddy Kit with 18g Turbine... Upgraded internal wastegate
(thinking about changing to the 20g to keep the rest of the piping for the IC)
Misc stuff you guys might want to know:
Greddy Profic B boost controller
Fidanza 12lb Flywheel
NST CR Lite Crank Pulley
If you guys need more info please feel free to ask.
im with Ace83 on this one. you would better off upgrading to a garrett 30-35r to make 450hp. i would also, for the power your try to make and the fact that you have knife edge your crank, do away with the NST crank pully and put the OE back on or buy a ATI damper. GOOD LUCK!
#13
why do u need all new IC piping? also put stock pulley on. with 750cc and a return system you should be able to make like 420, get some 900's off ptuning, if you wanna get a turbo that wont rob your bank account pickup a garret 60-1, actually someones selling one for like 500 in classifieds
#15
^ nah, it should do fine.. let him worry about it when it cracks
x2 this... weezy is selling cheap 60-1
900cc is fine if using gasoline.. gt35 is pricey but there are other less expensive alternatives.. no need for new pipes, a bigger IC maybe. ATI damper is a good investment for built motors, it does a better job on handling harmonic vibrations which are bad especially on race motors
why do u need all new IC piping? also put stock pulley on. with 750cc and a return system you should be able to make like 420, get some 900's off ptuning, if you wanna get a turbo that wont rob your bank account pickup a garret 60-1, actually someones selling one for like 500 in classifieds
900cc is fine if using gasoline.. gt35 is pricey but there are other less expensive alternatives.. no need for new pipes, a bigger IC maybe. ATI damper is a good investment for built motors, it does a better job on handling harmonic vibrations which are bad especially on race motors
#16
dont think the 750s could make it? was thinking about changing the piping cause of the diameter that it has now... figured a bigger turbo would have a bigger outlet. so a 60-1 would make the power?
what if the goal was 400hp? any difference with the 20g? or would i still need the 60-1?
just trying to see my options. ive spent some cash so far, but trying to reuse whatever i can to avoid spending much more.
Thanks for the input guys
what if the goal was 400hp? any difference with the 20g? or would i still need the 60-1?
just trying to see my options. ive spent some cash so far, but trying to reuse whatever i can to avoid spending much more.
Thanks for the input guys
#18
You dont need to upgrade a lot of your stuff...you focus on upgrading the turbo, an easier route would be 25g that will get you more room to around 500.. it should bolt right to your manifold. Your injectors might get work at high fuel pressure and high duty cycles, you can try it first if you would ran out of fuel.
http://www.fuelinjectorclinic.com/in...alculator.html
http://www.fuelinjectorclinic.com/in...alculator.html
#19
thanks for the info guys... the 25g sounds like a viable option. now ive just got to find one... lol only thing that im noticing is that i would still need an external wastegate... maybe new mani for it?