cant take it anymore!!!!!!!!!!!!!!!
#1
cant take it anymore!!!!!!!!!!!!!!!
alright who can help me with this i have been searching and searching for a zpi manifold or a "log style manifold" my manifold keeps cracking and cracking. its really ticking me off. dont mean to sound rude. i just cant stand it when i want to get it tuned and ready for college. i go to wyotech in septemeber and i dont want my tc running rich like it is right now but with the crack in the manifold its only going to cause issues with the back pressure and tunning. anyone able to help me or give me some sugestions? thanks chris
#4
tryed that but one the zpi manifolds they are turned differently than on regular manifolds. here is what i mean http://www.cardomain.com/ride/3223555 try going to that and your see the engine bay of my car. the turbo is turned 90 degress. other manifolds are not like that most turbo kits do not postion the turbo like this one does.
#7
Check the classifieds. Do you have a stage 0 or stage 1?? If you have a stage zero maybe get a dezod mani, tt mani, or treadstone mani and have a shop re-work your current downpipe.
#8
you should drive the extra couple of miles and go to UTI that is if you are down here in socal much better school imho oh yeah and to answer your post i beleive todd from turbotoyotas was selling these and you r just looking for a log style manifold they sell them all over the place dezod is good too
#12
Id say PM VulcanTurbo. Or visit there website www.vulcanturbo.com
PM TurboToyotas to see if he has any ZPI mani laying around.
Or check out the classifieds. Like i mentioned earlier. You could also see how much it would cost for a shop to make you one locally.
PM TurboToyotas to see if he has any ZPI mani laying around.
Or check out the classifieds. Like i mentioned earlier. You could also see how much it would cost for a shop to make you one locally.
#15
Originally Posted by highvoltage1
Check the classifieds. Do you have a stage 0 or stage 1?? If you have a stage zero maybe get a dezod mani, tt mani, or treadstone mani and have a shop re-work your current downpipe.
Those all have different flanges.
#16
Secondly, if you don't have the center cut in the flange, then yes you will experience cracks ever so often. Get your ZPI manifold cut down the center on the flange, not all the way through (PM me for pics and illustrations), and it will keep it from cracking. Depending on how the welds are now, it's hard to tell how long it will last since you said it's been re-welded so many times. It probably is weaker now. But should have been researching before you kept having some re-welded, cause this was discussed a LONG time ago.
#17
someone was selling his TT zpi replacement mani here, todd doesnt make them anymore..
here
https://www.scionlife.com/forums/vie...t=zpi+manifold
here
https://www.scionlife.com/forums/vie...t=zpi+manifold
#20