No, just leaned it out. Pulled about 5-10% amount of fuel in most boost areas. It's still a little too rich at low RPM boost, like 2400-2800.

 

Did you install the muffler backwards? I did that and it was rattling on my heatshield in the mid section of the car. It should go..

Spipe > 5" of pipe > giant muffler > 20" of pipe > rear section

The only thing I removed was the frame brace that goes directly under the rear seats. It wouldn't fit when I had the muffler backwards and forgot all about it when I spun it around.

 

hey carbon what slave version are you running on your fic....i just found out i was running the wrong one...im now on z104.hex and i think that fixed my whole stumble issue but not sure just yet.......need to drive around more

 

I don't remember lol. I think it was 104

 

So the big muffler side connects to the 2 bolt to vband adapter (5" pipe) then the straight pipe side connects to that 20" pipe?

I tried it that way and the muffler hits the heatshield where the secondary cat is.. I think its that straight bracket that rattles witht the muffler, i had it bent but i guess it still hits

 

The muffler side should be in the front, once everything is tightened up it will go into the right place. I didn't have any rattles at all after I put the muffler in right, even with my TT downpipe in it doesn't make any noise, the only thing that does is the dumptube.

 

dump is rattling.....against the down pipe?

 

oh I see, I prolly will bend that heatshield and see if it will fit better..

but this how I had it in order

 

Send me a pm to remind me to put up some install pictures of the exhaust. I just realized the pictures of our exhaust on the floor is not 100% correct. The two hangers on the muffler should be pointing downward when installed and not upwards like we have it shown in the pictures.

MrC

 

oh yeah I didnt notice that either haha, but yeah the hanger is pointing downwards lol

 

Lol, that picture is wrong. That's how I originally had it installed.

Ace, do you have the S-Pipe also?

 

no spipe since getting todds for better fit with his dp. seems like the order on that pipe is correct when i pmed MrC, he will post pics soon but ill try yours if it still doesnt work

 

The order is right, but the muffler is backwards and upside down. The way it is right there, with the muffler farther back, it will hit a bolt that holds the heatshield in place.

 

ya i installed mine upside down thx to that picture.. and ended up scraping my muffler on thousands of speed bumps for 2 weeks lol! o well

 

We cant let this thread die.. Back to the front page..

 

lol you should have remembered the stock hanger position its almost the same as ptunings lol.. I finally got that bracket below the muffler out, no more rattles!

 

hahaha thats good news =D

 

It wouldn't have died, I've got new stuff coming in a few weeks and new numbers coming in the spring :D.

 

wat u have on the way?

 

hey do eithe rof you have an spipe i can buy?