Custom Turbo kit.....Miami Style? updated pics pg.11
#144
so i tend o get random misfires round 5k when im at full throttle, i have iridium ngks, i step colder. I did not gap them, i just popped them in. Someone told me i should get them gapped closer? Should i?
#147
I Know i should of gone w/ 700s, I will be getting them soon, im making up my own little stage 2, should have it done in a couple months gona go with
700+CC injectors
Fuel Pump
water/meth inj.
new clutch
new tune.
12 psi.
700+CC injectors
Fuel Pump
water/meth inj.
new clutch
new tune.
12 psi.
#151
sup crayola i might be tuning my new turbo kit tomorrow! i will let you know. the kit came out good and all but alot of modification was done so that turbo kit i bought from emotorsuse.com is crap and a waste of money! lol but anyways i willl let you know tomorrow what i get if i go or whatever!
#154
So check out my progress on recirculating my HKS.
Heres a mini DIY
I started by ordering the hks recirculation fitting online...they are everywhere, as soon as i got the part in i drove over to NAPA and got myself a 1'' radiator hose.
You start off by removing the front cover of the BOV
You then change the air fin that comes in the BOV to the recirculation fitting.
now you can attach the hose to it
Now with the new fitting on the BOV cover you can now place the cover back onto the bov mounted on the charge pipe. Be careful with the screws they are tiny and love to fly out of the BOV I'm missing 1 out of the not sure maybe 8 haha hopfuly no leaks will occur but its on there ok.
Now with the hose attached to the BOV i have it set to be tapped into my intake inbetween the turbo and my MAF, but sitting closer to the turbo....this is still up in there air anyone think i should put it anywhere else? this method seems most reasonable. Heres a photo:
a close up as to where the hose will be tapped on the intake
i should be going in a couple of days to miami muffler for them to weld me a 1'' inlet. as for now im gona be driving around w/ the recirc fitting on, bov'in to the atmosphere (lame)
Heres a mini DIY
I started by ordering the hks recirculation fitting online...they are everywhere, as soon as i got the part in i drove over to NAPA and got myself a 1'' radiator hose.
You start off by removing the front cover of the BOV
You then change the air fin that comes in the BOV to the recirculation fitting.
now you can attach the hose to it
Now with the new fitting on the BOV cover you can now place the cover back onto the bov mounted on the charge pipe. Be careful with the screws they are tiny and love to fly out of the BOV I'm missing 1 out of the not sure maybe 8 haha hopfuly no leaks will occur but its on there ok.
Now with the hose attached to the BOV i have it set to be tapped into my intake inbetween the turbo and my MAF, but sitting closer to the turbo....this is still up in there air anyone think i should put it anywhere else? this method seems most reasonable. Heres a photo:
a close up as to where the hose will be tapped on the intake
i should be going in a couple of days to miami muffler for them to weld me a 1'' inlet. as for now im gona be driving around w/ the recirc fitting on, bov'in to the atmosphere (lame)
#155
Nice... it should work out nicely. You may even consider making the tube shorter and plumbing it in right after the MAF.. but I think it'll work fine where it's pointing to now.
:thumbsup:
:thumbsup:
#156
i thought about making it shorter and placing it closer to the maf but the pipe sits up at a slight angle....a flatter tap may flow better. im freaking out a bit though i just took the car for a drive w/ only the recirc fitting on and it feels like the car has a delay in getting to boost, and the car does not hit full boost....u think its because the recirc pipe is not on and the fitting makes the BOV release pressure in a different way?
#158
yuh man its just a fitting that you added on the hks ssq it doesnt do anything to the car. like b real said its leaking boost! i need to get a better BOV. i have a generic greddy type rs BOV. sounds realy good though call me up andwe'll meet on sunday
#159
If he like ths HKS SSQ, he needs to get a real one - one in which the adapter fits.
Any BOV will work just fine if you recirculate it.. including the Synapse.. although I find their BOV to be no better than anyone elses.
Any BOV will work just fine if you recirculate it.. including the Synapse.. although I find their BOV to be no better than anyone elses.